Compputer reboots constantly!

[peskypete 0]

Here is my problem.

My computer with a GV-800 card is in the attic. It runs 24/7.

If I do not have geovision (8.3) running, it is stable.

When I have 8.3, or 8.2 running, I get constant re-boots, sometimes, but not always, with the 'Your system has recovered from a serious error...' WINXP message.

 

If I look at the log file within Geovision, I see many reboots, some times a few an hour, sometimes less frequent.

For example (from reading log file), from 12:30 am to 1:15 a.m. 5 System Startup's, then the next one occurred at 6:00 a.m.

No pattern at all.

This is a dedicated sytem with just the op system running.

I have done quite a few complete un-installs and 'cleans' as much as possible, to try to get things 'spotless' but the re-starts still occurr.

 

I wrote an email to usavisionsys but that was a week ago and, no response.

Anyone else experiencing this same problem?

[ilkevinli 0]

It sounds like windows may be crashing. Windows is set to reboot by default when it crashes. Try this:

 

1. Right click "My Computer" and select Properties

2. Click the Advanced Tab

3. Click on the Settings button under Start up and Recovery

4. Uncheck the box Automatically Restart

 

Now if windows crashes it will show the Blue screen of death and it will also show you whats crashing it.

 

Good luck

[rory 0]

sounds like your PC is incompatible with Geo.

What are the hardware specs?

[shentim 0]

Hi peskypete,

 

Sorry to hear about your issue, but what rory said is probably correct. Can you please forward me the email so that I may have our support team look in to it? Thanks!

[jimski 0]

Is the computer a ibm unit? GV was doing the same thing with me using ibm lenevo.I switched the unit now it is good