adnanali 0 Posted July 16, 2009 I have a CCD PCB it has three wires RED, BLACK AND YELLOW. I figured out that Red was positive and Black was gnd...and hav connected them to the power supply. The camera powers up indicated by a LED. The question is how do I get the video to the TV? is it possible to connect single yellow wire to the ANT IN or VIDEO IN?? if so how? Share this post Link to post Share on other sites
VST_Man 1 Posted July 16, 2009 "normally" the ground is common to both the power and video. just connect the yelloe AND ground to the video in.....DO NOT connect to the RF Share this post Link to post Share on other sites
Soundy 1 Posted July 16, 2009 "normally" the ground is common to both the power and video. just connect the yelloe AND ground to the video in.....DO NOT connect to the RF Seconded! Share this post Link to post Share on other sites
adnanali 0 Posted July 16, 2009 so that means the negative of DC out from the adapter will be acting as ground and is combined with the yellow(VIDEO OUT)??? Share this post Link to post Share on other sites
adnanali 0 Posted July 16, 2009 ok got it working..........thnks a lot ............... Share this post Link to post Share on other sites