Sup3R_B0Y 0 Posted July 19, 2009 Hi folks, I've a DVR (AVTech 787) installed at my office. It worked fine for 3 months but currently I'm facing a technical issue. Tried hard but still couldn't get a solution. Well, the problem is that my card is not displaying camera plugged at 14th port while others are working fine. But, when I plugged it out the slideshow of other cam does not work properly. Sometimes it displays 12th cam instead of 3rd and sometimes 5th instead of 7th. Any help will be greatly appreciated! Many Thanks, Sup3R_B0Y Share this post Link to post Share on other sites
Squiffy 0 Posted July 19, 2009 It maybe a fault on your DVR, but if not, then I think this may resolve your problem: http://www.cctvforum.com/viewtopic.php?t=11788 To quote from the thread: "To change the camera image layout during live view: 1) Go to the live view 2) Press "SET/ENTER" - one of the camera images will go green 3) Use the Up/Down/Left/Right buttons to move the green box around to select one of the cameras (or an empty channel) 4) Use the + and - buttons to select a channel number. The channel numbers are in white. 5) Press "SET/ENTER" again." Note however, on my AVC787 the images don't go green - just a white-ish overlay. Press "Set" to invoke the select camera no. option, then press "Enter" to move that camera image to that part of the display. Share this post Link to post Share on other sites
