hansolo 0 Posted August 10, 2009 Hi! A customer of mine have one old mux with 9 Philips G3 Autodome, and one week ago he bought a GV1480 with a GV-NET (232 to 485 converter). The problem is that he wants to move the domes with the DVR and I don´t know if I can to do that with the Bosch protocol listed in the DVR (Bosch TC700/8560). I was trying all the day and I can get it. Do you know if I have to connect the shield of the daisy chain wiring to the DVR? (I can´t imagine where). Do you know if the old G3 autodomes have another protocol than the Bi-phase? Thanks to all! PS: sorry for my English. Share this post Link to post Share on other sites
jeromephone 6 Posted August 12, 2009 I used a couple of protocol converters when I had a similar problem. I cannot rememeber the name now but they can convert just about any protocol to pelco P or something common. I used the converter on some BOSCH domes and they worked fine. Share this post Link to post Share on other sites
hansolo 0 Posted August 12, 2009 Sennetech? Maybe is the solution, but here in Argentina are really expensive. 1400 dollars each. Share this post Link to post Share on other sites
Biphase 0 Posted August 15, 2009 G3 domes....depends on the exact model # on what it supports. Does it have 4 DIP or 8 DIP switches on the top ? Some with the 8 DIPs support Pelco P.. RS-232 or Biphase generally. You are limited with 232 - 50ft. Look on DVR to see what it outputs... Then take a look at the Bosch LTC 8782 converters. There is a list of protocols that can be converted to biphase. You should be able to output pelco p or d at least? If so, then there is a converter for you. Share this post Link to post Share on other sites
trevttu76 0 Posted January 15, 2010 G3 domes....depends on the exact model # on what it supports. Does it have 4 DIP or 8 DIP switches on the top ? Some with the 8 DIPs support Pelco P.. RS-232 or Biphase generally. You are limited with 232 - 50ft. Look on DVR to see what it outputs... Then take a look at the Bosch LTC 8782 converters. There is a list of protocols that can be converted to biphase. You should be able to output pelco p or d at least? If so, then there is a converter for you. Any idea what the dip switches mean?? I have an older G3 (LTC 0828/20) that has 8 switches and I cant find anything that shows what they mean. I am having trouble setting it up and getting it going. Share this post Link to post Share on other sites
Biphase 0 Posted January 18, 2010 8 DIPS are the older G3 domes. You might want to check the firmware revision, what does it say when it boots up? 5.x? Share this post Link to post Share on other sites
