thewireguys 3 Posted August 24, 2009 So it I guess I have to use a wireless laptop to connect to the IP camera if there is no BNC out to set up the camera? Anyone know anything about stardot technologies? http://www.veracityusa.com/products/pinpoint/pinpoint.pdf Check out Pinpoint for Veracity it works very well Share this post Link to post Share on other sites
bruce 0 Posted August 28, 2009 Hi IP cam is a future, analog will be replaced someday, Share this post Link to post Share on other sites
thewireguys 3 Posted August 28, 2009 Hi We are IP CAM/WEBCAM producer, and have more than 100 different models at your options, the cam support remote mobile viewing and control, we are able to provide the centre management software---free of charge, if you need something or have the interest to know more, pls just turn to me with the following information, thank you, Bruce Lee here we go again Shenzhen EasyN company(China Office) Here we go again Share this post Link to post Share on other sites
bpzle 0 Posted September 10, 2009 Hi IP cam is a future, analog will be replaced someday, What insight! This guy knows what he's talking about! Share this post Link to post Share on other sites
metafizx 0 Posted September 11, 2009 you should check out the IQEye Pro series, Sentinel or 750 cameras. Really good cameras IMHO. not cheap but high quality. lots of capabilities in the firmware. also analog BNC output. I tried Arecont 2100DN camera and it had very poor night mode compared to the IQEye 752. Share this post Link to post Share on other sites
