Integratek 0 Posted August 20, 2009 Hello all I have a customer who owns an orangery which is constantly vandalized by some unfriendly neighbours. Due to few reasons it's too expencive and inefficient to surround it by a fence, so what he's willing to do is install some early warning system which might allow him to be informed at early stages of breach - before alarm system inside offices goes off - to get there in person with his family and/or police So what I was thinking is that to get a Magic Radar or Geovision PC card with IO board, connect some motion sensors to it, maybe a relay to turn on lights there, maybe install one or two IR PTZ's to locate villain's location, etc etc. The question is whether Magic Radar or Geovision (or any other brand) has some advanced scripting abilities for IO channels. E.g. if motion detected on sensor #1 send SMS (or call mobile phone); aim PTZ at motion area; after 5 minutes turn on lights Share this post Link to post Share on other sites
cglaeser 0 Posted August 20, 2009 How long is the potential/likely breach distance? Best, Christopher Share this post Link to post Share on other sites
katie1985 0 Posted August 21, 2009 Hello all I have a customer who owns an orangery which is constantly vandalized by some unfriendly neighbours. Due to few reasons it's too expencive and inefficient to surround it by a fence, so what he's willing to do is install some early warning system which might allow him to be informed at early stages of breach - before alarm system inside offices goes off - to get there in person with his family and/or police So what I was thinking is that to get a Magic Radar or Geovision PC card with IO board, connect some motion sensors to it, maybe a relay to turn on lights there, maybe install one or two IR PTZ's to locate villain's location, etc etc. The question is whether Magic Radar or Geovision (or any other brand) has some advanced scripting abilities for IO channels. E.g. if motion detected on sensor #1 send SMS (or call mobile phone); aim PTZ at motion area; after 5 minutes turn on lights Hello! Actually you can setup a system with email alarm function. http://www.cctvhotdeals.com/products/8-Camera-Complete-H-264-CCTV-DVR-Security-System-147.html Or you can make a customized system by your specific needs... 8 CH CCTV Real Time DVR 1TB HD H.264 Video Compression Video Input / Output: BNC 8/BNC 2 Video Output: VGA Audio Input / Output: RCA 1/RCA 1 Signal System: NTSC / PAL Display/Record: 240 fps Recording Mode: Continuous/Scheduled/Motion/Sensor Display Mode: Each/All/Auto Switch/Hidden Playback Search: Time & Date, Event List Network: RJ45 TCP/IP or DDNS Remote Access: LAN or IE Browser IR Remote Control Support Live! Preview via 3G Mobile PTZ via RS-485 Port Sensor/Alarm: 8 CH/1CH 1/3" Sharp CCD Image Sensor Nigh Vision 420 TV Lines One 420 Line Pan Tilt CCD Camera You can set the display mode to motion detection, and then set up remote access and email alarm as well as sensors, then you will get an email when sb. is motion detected on sensor in those places you preseted. Hope this will help you a little! Share this post Link to post Share on other sites
thewireguys 3 Posted August 21, 2009 Hello all I have a customer who owns an orangery which is constantly vandalized by some unfriendly neighbours. Due to few reasons it's too expencive and inefficient to surround it by a fence, so what he's willing to do is install some early warning system which might allow him to be informed at early stages of breach - before alarm system inside offices goes off - to get there in person with his family and/or police So what I was thinking is that to get a Magic Radar or Geovision PC card with IO board, connect some motion sensors to it, maybe a relay to turn on lights there, maybe install one or two IR PTZ's to locate villain's location, etc etc. The question is whether Magic Radar or Geovision (or any other brand) has some advanced scripting abilities for IO channels. E.g. if motion detected on sensor #1 send SMS (or call mobile phone); aim PTZ at motion area; after 5 minutes turn on lights Hello! Actually you can setup a system with email alarm function. http://www.cctvhotdeals.com/products/8-Camera-Complete-H-264-CCTV-DVR-Security-System-147.html Or you can make a customized system by your specific needs... 8 CH CCTV Real Time DVR 1TB HD H.264 Video Compression Video Input / Output: BNC 8/BNC 2 Video Output: VGA Audio Input / Output: RCA 1/RCA 1 Signal System: NTSC / PAL Display/Record: 240 fps Recording Mode: Continuous/Scheduled/Motion/Sensor Display Mode: Each/All/Auto Switch/Hidden Playback Search: Time & Date, Event List Network: RJ45 TCP/IP or DDNS Remote Access: LAN or IE Browser IR Remote Control Support Live! Preview via 3G Mobile PTZ via RS-485 Port Sensor/Alarm: 8 CH/1CH 1/3" Sharp CCD Image Sensor Nigh Vision 420 TV Lines One 420 Line Pan Tilt CCD Camera You can set the display mode to motion detection, and then set up remote access and email alarm as well as sensors, then you will get an email when sb. is motion detected on sensor in those places you preseted. Hope this will help you a little! wow Share this post Link to post Share on other sites
thewireguys 3 Posted August 21, 2009 You could try something like this. It's completely wireless so you could move the devices where ever you needed the protection. http://www.tattletalealarm.com/systems/index.php Share this post Link to post Share on other sites
Integratek 0 Posted August 21, 2009 How long is the potential/likely breach distance? Best, Christopher the orangery is 40 meters by 15 meters breach area is about 20-50 meters from orangery half surrounding it. Total perimeter lenght is probably 150-200 meters Share this post Link to post Share on other sites
cglaeser 0 Posted August 21, 2009 the orangery is 40 meters by 15 meters Check out the Crow Outdoor IR Beams at http://www.crowelec.com/products.asp?param=6#part_33 Best, Christopher Share this post Link to post Share on other sites
