tdprenz 0 Posted March 15, 2005 I just got my Geovision GV800 and after instalation with a GE-Interlogix camera I see no video on that camera in the GUI. any help... Share this post Link to post Share on other sites
rory 0 Posted March 15, 2005 dont know if it is the same with GEO, but alot of PC DVRs require you to restart to recognise a new camera. Share this post Link to post Share on other sites
qman 0 Posted March 15, 2005 Ok, "8021" GEO problems and "O" I-VIEW problems. Share this post Link to post Share on other sites
tdprenz 0 Posted March 16, 2005 I tried rebooting still just a video lost signal. I tried the camera straight to a monitor and all is well there. Share this post Link to post Share on other sites
rory 0 Posted March 16, 2005 is that camera input enabled in the DVR system setup? Share this post Link to post Share on other sites
wahloon 0 Posted March 16, 2005 I had a problem like that before with geovision, what I did was just uninstall the software, then reinstalled it right back. Share this post Link to post Share on other sites
tdprenz 0 Posted March 16, 2005 Thanks for the help, reinstalling it took care of it. Share this post Link to post Share on other sites
