joegrab 0 Posted August 29, 2009 Is there another way to convert *.787 files? Playback won't install on my XP Pro machine, opens a dos screen and then immedately closes. Share this post Link to post Share on other sites
joegrab 0 Posted August 30, 2009 I ran the backup and selected CD. The playback.exe off the CD worked just fine. Hmmm? I also solved another problem - If your trying to backup with sound make sure you change the audio setting from Listen to Playback. For example; if you have a camera on channel 1 with sound recording and have a speaker connected to the DVR you probably have the audio set to AUDIO 1 (L) Listen. Change it to AUDIO 1 (P) Playback before you create your backup. Share this post Link to post Share on other sites
scorpion 0 Posted August 30, 2009 For those who have problems then download the Video Viewer for AVC 760 A (MPEG model), or Video Server E for AVC 760 (JPEG Model). The play back software is part of the whole package. Share this post Link to post Share on other sites
manstim 0 Posted October 14, 2009 I ran the backup and selected CD. The playback.exe off the CD worked just fine. Hmmm? I also solved another problem - If your trying to backup with sound make sure you change the audio setting from Listen to Playback. For example; if you have a camera on channel 1 with sound recording and have a speaker connected to the DVR you probably have the audio set to AUDIO 1 (L) Listen. Change it to AUDIO 1 (P) Playback before you create your backup. Hi there, I've read a this forum for the last few days looking for information on my audio issue. Is it possible to have both (Listen and Playback)? Thank You. Share this post Link to post Share on other sites
joegrab 0 Posted October 14, 2009 yes, you can listen to the audio live and during playback. The only issue I ran into was using backup. you need to make sure you have the camera on the right channel for audio to work using backup. In my case channel 5 is tied to audio 1. So when you backup channel 5 and play it back you will hear the audio. Share this post Link to post Share on other sites
manstim 0 Posted October 14, 2009 yes, you can listen to the audio live and during playback. The only issue I ran into was using backup. you need to make sure you have the camera on the right channel for audio to work using backup. In my case channel 5 is tied to audio 1. So when you backup channel 5 and play it back you will hear the audio. NICE!!!! thx for the info. I have another enquiry. I've set the DVR audio to " Listen". I can hear it on my attach speaker but unable to hear it via remote (IE) or using Video server E or Video Viewer (Im using the older Avtech 16 channel & older 4 Channel CPCam). Thank You Share this post Link to post Share on other sites
joegrab 0 Posted October 14, 2009 I was never able to get audio over internet working, I don't think it's supported. Share this post Link to post Share on other sites
scorpion 0 Posted October 14, 2009 There is an audio Icon. It will be "greyed" out, or it will be Blue, or it will be Yellow. You will have to activate the icon for remote audio. If the power goes out then the audio has to be set up again at the DVR for remote audio. Share this post Link to post Share on other sites
manstim 0 Posted October 15, 2009 There is an audio Icon. It will be "greyed" out, or it will be Blue, or it will be Yellow. You will have to activate the icon for remote audio. If the power goes out then the audio has to be set up again at the DVR for remote audio. ....is it possible to be more specific, accessing via IE on the new DVR, the speaker icon is mute (default), I just need to Enable it, i can hear the sound. But on the older DVR via remote (IE) it seem that "speaker" icon cannot be found or it just not supporting. I've try using the Video Server E & Video Viewer, i have the same issue on the older DVR. Thank You. Share this post Link to post Share on other sites
scorpion 0 Posted October 15, 2009 It is a pain! The problem is the two buttons have to be pressed at the same time. I have not figured out how to press two icons on the remote aps at the same time. Yeesh! Share this post Link to post Share on other sites
manstim 0 Posted October 16, 2009 .....which icon or two button to press at the same time? Thank You Share this post Link to post Share on other sites
scorpion 0 Posted October 16, 2009 Look at the Slow, and Zoom Buttons on the front panel. Below the two buttons you will see that it says " audio ". The first press gives you live audio, and the second press of both buttons gives you play back audio. For audio with Video playback you will need to press an icon on the playback tool set. Page 35 of your manual. On the playback tool bar you will see a circle on the right side with stop / play / f forward / rewind. To the left of this circle is two rows of eight buttons. In the left row, third button down is the config button, (wrench, and screw driver icon). You will need to select this button, and you will need to see if the AV sync has a check mark in the square. Share this post Link to post Share on other sites
