alexx 0 Posted September 7, 2009 hi all!!! There are problems with the DVR AVC760, when calling osd menu settings on the screen does not show the full menu. No network configuration settings and language. After a hard reset, nothing has changed. However, I was able through the network and software to enter into it and tried for fun flash "Russian language" firmware was successful, but all left unchanged. Lament MAC address to a network device punishment was ff: ff: ff .... How to get out of the situation? if you have a full firmware? today updated the firmware, update was successful, but unfortunately all the faults remain the same. 'll show what could be the reason? where drip on? Share this post Link to post Share on other sites
konstask 0 Posted July 26, 2010 Hello, I have the same problem with my client a CPCAM 560 IDE version working for 3years and today when I gone to his store there is no network menu and only Chinese and dutch language anyone can help me here? Share this post Link to post Share on other sites
scorpion 0 Posted August 2, 2010 ALEXX Is you DVR brand new? Can you take it back for a refund? KONSTASK Is sounds like your's is a chip failure. Does the internet connection work, or has that failed with the menu fail? Share this post Link to post Share on other sites
konstask 0 Posted August 2, 2010 Thanks scorpion, The network work ok, I can see and configure from internet. the problem is the menu chopped and the Languages. With no guarantee it worth the service? Share this post Link to post Share on other sites
