hikvision 7016his firmware

[leffe104 0]

i have a dvrdvs 7016 and a have a problem : i was trying to update the firmware of dvs because i couldnt see my dvs via windows cellphone(htc) . i made the connection with my pc via rs232 cable. i erased the flash of dvs, the i pressed the "u" key i put the ip of dvs (192.0.0.64) and the ip of pc (192.0.0.66) with the same subnet mask (255.255.255.0) and nothing , i have connection and the paremeters of com port is everything right but i take message something about kernel . please help because the dvr now is formated. (i have the firmware: digicap.dat) i have ftp software .

HELP!!!

[shoreviewsecurity 0]

I am not to sure what you mean by the DVR is now formatted?? I am familiar with your model DVR although have never attempted connecting by phone.

 

You should be able to flash the DVR again with the same firmware. If I understand you, you may have to do this at the DVR proper and not over your network. Do you have a monitor connected to the DVR? If so, log in and re-flash from there.

 

Hope this has helped.

 

Mike

[leffe104 0]

can you help how please?

we have to know default network settings? i am very confused

[leffe104 0]

can you help how please?

we have to know default network settings? i am very confused

formatted i mean i have erase the flash memory of dvr i dont see anything at the screen

[shoreviewsecurity 0]

At least these settings were the defaults of those DVR's we installed...

 

DVR IP 192.168.1.150

Gateway 192.168.1.1

Subnet 255.255.255.0

Port 8000

Http Port 80

 

I tried to attach a snap shot of the network config but I have reached my maximum upload quota.

[leffe104 0]

i tried via telnet with rs232