Jump to content
leffe104

hikvision 7016his firmware

Recommended Posts

i have a dvrdvs 7016 and a have a problem : i was trying to update the firmware of dvs because i couldnt see my dvs via windows cellphone(htc) . i made the connection with my pc via rs232 cable. i erased the flash of dvs, the i pressed the "u" key i put the ip of dvs (192.0.0.64) and the ip of pc (192.0.0.66) with the same subnet mask (255.255.255.0) and nothing , i have connection and the paremeters of com port is everything right but i take message something about kernel . please help because the dvr now is formated. (i have the firmware: digicap.dat) i have ftp software .

HELP!!!

Share this post


Link to post
Share on other sites

I am not to sure what you mean by the DVR is now formatted?? I am familiar with your model DVR although have never attempted connecting by phone.

 

You should be able to flash the DVR again with the same firmware. If I understand you, you may have to do this at the DVR proper and not over your network. Do you have a monitor connected to the DVR? If so, log in and re-flash from there.

 

Hope this has helped.

 

Mike

Share this post


Link to post
Share on other sites
can you help how please?

we have to know default network settings? i am very confused

formatted i mean i have erase the flash memory of dvr i dont see anything at the screen

Share this post


Link to post
Share on other sites

At least these settings were the defaults of those DVR's we installed...

 

DVR IP 192.168.1.150

Gateway 192.168.1.1

Subnet 255.255.255.0

Port 8000

Http Port 80

 

I tried to attach a snap shot of the network config but I have reached my maximum upload quota.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×