lpdog 0 Posted September 18, 2009 Does anyone know if I can connect an Intellex to a Pelco matrix CM6800 so that I can remotely control the connected Pelco PTZs using Network Client? The Intellex has an option for Pelco Matrix for ptz control but no documentation on how to wire and what are the correct settings in the matrix. Thanks in advance. Share this post Link to post Share on other sites
tip_ex 0 Posted March 1, 2010 Does anyone know if I can connect an Intellex to a Pelco matrix CM6800 so that I can remotely control the connected Pelco PTZs using Network Client? The Intellex has an option for Pelco Matrix for ptz control but no documentation on how to wire and what are the correct settings in the matrix. Thanks in advance. Hi! Yes it can be done. You need to connect a Null modem serial cable between the COM port of the Intellex and the COM1 of your Matrix. That's it. Regards, Share this post Link to post Share on other sites