ginogag 0 Posted September 24, 2009 hi all ,question ....purchased a new dvr card on ebay with 4 bnc connecters,HIFAST WITH DRIVER AND SOFTWARE CD , i only have 2 on the outside of my house . IM AN ELECTRICIAN , and did few years of security work , just pulling wire and terminating ...LOVED THE WORK ,now i do my house ..after i put the card in and connect the cables and install the drivers and software how do i set it up on my dell windows xp (4 gigof ram) dektop. i want to view ,record ,and access from my other computer(laptop) when im away from home .my router is next to my desktop and i have ip address that doesnt change...static if im correct...i have alot of space on my harddrive remaing . , about 80 gig.. how do i set up my computer .....do i go to MY COMPUTER ETC.....IF U CAN I NEED A STEP BY STEP .....ILL ACTUALLY PRINT IT OUT AND FOLLOW THE STEPS THANKS GUYS Share this post Link to post Share on other sites
tomcctv 190 Posted September 24, 2009 hi. ginogag. its not as easy as sending you manual. i have been doing cctv for 30 years and i would not like to build my own. you need things like the right motherboard graphics cards googles that connect to dingdongs. plus a very good dvr card. and its a no no from ebay thats why they are on ebay. they are some very good guys on here who know what you need and can give you very good info on gear. lets face it the guys who build on here passed off jobs from nassa because it was to easy...............building your own is BL**DY HARD Share this post Link to post Share on other sites
