How to do configuration & setting for remote viewing?

[missmimi 0]

Hi everyone,

 

I need help to do configuration & setting for remote viewing on Senpro DVR. We have 5 DVRs at the moment. Is there any standard steps to follow?

 

Any help would be great.

Thanks!

[scorpion 0]

Way too many variables! You might need the help of someone local to you.

 

_____________________________________________________________

 

First look here (click on top right if you see an ad)

 

http://www.portforward.com/english/routers/port_forwarding/routerindex.htm

 

Pick your router, and then select Gadspot IP camera (this should be close to what you need for a DVR rather than setting up a multiplayer Doom game).

 

Go into your router, and set up your port forwarding

 

enter your linksys model number for info

http://www.linksysbycisco.com/US/en/support

 

http://kb.netgear.com/app/home

 

http://www.dlink.com/support/products/

 

What port does your DVR use? Does it use more than one?

_________________________________________________________

 

Next go to a computer located where the DVR is located, and go to

http://ipchicken.com/

 

Write down the IP address that it shows you. This is the address you will use at a remote site to log in to your DVR.

(in some cases you may have to use :portnumber at the end of the ip address.

 

___________________________________________________________

 

Before you set up remote view you will want to have video on a local LAN with the DVR. In other words if you do not have local video then you will not get remote view.

 

What is the gateway?

windows XP. START > RUN > enter cmd on the line > type ipconfig press enter

 

write down all of those numbers.

_____________________________________________________________

 

You can find product info about ATT, Verizon, Brighthouse, Cox, ect, ect

http://www.dslreports.com/faqnew

 

_____________________________________________________________

 

More info here:

http://scorpiontheater.com/videonetworkingwithavtech.aspx

 

Is this enought to get you started?