Sharuk 0 Posted October 3, 2009 Hi, does anyone know how to get this DVR to control this ptz, I think I am loosing my mind! I have tried almost everthing ( I think anyway) but obviousley I am not doing something right. The DVR has RS485 Tx-, Tx+, Rx-, Rx+ and I have connected the ptz Rs485 A to Tx+ and B to Tx-, the baud is set to 9600, N,1, 8 and the protocol I have tried several including DennardDome and the addr as per the ptz is 240 but everytime the ptz is powered up it says Den Panel 4.0 and waiting for host then starts initialising the servos and then goes in to some sort of preset cruising mode (ie from memory as this happens weather the rs485 is connected or not. Can someone please identify my errors, all help will be mvery much appreciated Share this post Link to post Share on other sites
kstds 0 Posted July 10, 2013 Hi noticed there werent any replies but did you manage to get the problem solved - i have exactly the same problem ( 2050 dome and alien dvr ). Share this post Link to post Share on other sites
joseph.chen0312 0 Posted July 16, 2013 Hello Guys, Dennard PTZ has designated protocol so do you have make sure DVR you own has supported that protocol otherwise both edge is difficult to connect. Share this post Link to post Share on other sites