pingsquare 0 Posted March 23, 2005 Hiya, got a friend requesting for these....is it possible to connect cctv with alarm? he's currently using kodicom....he's asking is it possible to do in such a way that when there's motion detection, the alarm sounds? is it possible with kodicom? or any other DVR software provide this function? Share this post Link to post Share on other sites
Integratek 0 Posted March 23, 2005 It is possible with kodicom, he only have to obtain controller card KIO-1616 Share this post Link to post Share on other sites
qman 0 Posted March 23, 2005 The I-VIEW also supports this, all you need to get is the relay/alarm module. Share this post Link to post Share on other sites
Thomas 0 Posted March 23, 2005 We support it with a DIO card. Share this post Link to post Share on other sites
rory 0 Posted March 23, 2005 i havent seen a DVR yet that doesnt support it Share this post Link to post Share on other sites
pingsquare 0 Posted March 24, 2005 i think i need a detailed explaination as i dun understand what do u mean by just adding in the card(Kio 1616) Share this post Link to post Share on other sites
Integratek 0 Posted March 24, 2005 obtain a I/O controller KIO-1616 install it in your DVR station configure Diginet Site software according to your needs All required information can be found in manual Share this post Link to post Share on other sites
mattdb 0 Posted August 28, 2006 obtain a I/O controller KIO-1616install it in your DVR station configure Diginet Site software according to your needs All required information can be found in manual Where would one obtain one of these cards? Share this post Link to post Share on other sites
heloder 0 Posted August 29, 2006 Email me. We have them. jason@saysecurity.com Share this post Link to post Share on other sites
470 0 Posted September 25, 2006 Try an Inner Range Concept 4000 running insight interfaced with a Dedicated Micros, Pacom or a couple other DVR's. FULL intergration with the alarm Share this post Link to post Share on other sites