need2shave 0 Posted December 18, 2009 Hello all, I own a Servision IVG400. I use this dvr in a mobile environment via a verizon wireless broadband card. My problem however is the broadband card has a dynamic IP address, and in order for me to access the dvr remotely, I have to go through a proxy server (which has a significant time delay and often cuts out). My question is, can you use DDNS with a broadband card? If so, any advice on how I go about setting this up? I registered with NO-IP (which is supported by Servision) but I still can't connect to the DVR. I think my issue might be determining which IP address I list with NO-IP etc. Any help would be greatly appreciated. Thank you! Share this post Link to post Share on other sites
shankarsha 0 Posted February 8, 2010 Hi, you may use DYNDNS.org for dynamic ip connection. you must set local ip and port no. above 8000 for dvr and forward the port in modem and open the firewall for accepting WAN side request for port and local IP. Also put dyndns login and host details in DDNS settings of broadband modem for dynamic ip update. For details on port forwarding visit portforward.com Hope it helps. Share this post Link to post Share on other sites