ayalas 0 Posted December 22, 2009 Im using two monitors to view the cams with the same card (computer)but in one of the monitors the cams are in pink. When i play back a video on that monitors it looks fine its only on live view. How can i do it so i can see the cams on both monitors??? Share this post Link to post Share on other sites
ayalas 0 Posted December 22, 2009 o.k i just figure it out. Heres how. You will need to disable the "direct draw overlay" under system configure and restart GeoVsion software. nice.. Share this post Link to post Share on other sites
ayalas 0 Posted December 22, 2009 Great, now i have another problem i cant get full view. Any help please.. Share this post Link to post Share on other sites
Guest Posted December 22, 2009 Great, now i have another problem i cant get full view. Any help please.. Try this, depends on graphic card and more: 1. Activate the clone function on your craphic card! 2. Acdtivate the DSP/Direct draw overlay in Geovision! If you have same on both now, you're in heaven! If it dosent work then buy a monitor multiplier, take the monitor cable from PC into tis device and then have 2 cables out one for each monitor and you will have same on both! DSP/Direct draw overlay is depending on support both from graphic card and DVR software! JD Share this post Link to post Share on other sites
