eraser 0 Posted December 29, 2009 HI, I have a KPD604 (AVTECH) and trying to use the Eagle Eyes to view my cams from iphone. It successfully connected to my KPD604, however it didn't show up anything. I tried to change the cam to be displayed from Eagle Eyes, although it didn't show up anything from my iphone, but I can see it changed from the monitor that connected to my KPD604. I think this may be due to the firmware is too old, I would like to have a upgrade of the firmware. Anyone have the latest firmware for KPD604? the firmware that my KPD604 is 1127-1011-1017-1013-L9-6C1B Thanks a lot! Share this post Link to post Share on other sites
scorpion 0 Posted December 30, 2009 I do not know much about cell phone set up. If you DVR has IDE hard drives then you may need to use Eagle Eyes old. If it has SATA drive then you need to use Eagle Eyes new. Share this post Link to post Share on other sites
eraser 0 Posted December 31, 2009 I do not know much about cell phone set up. If you DVR has IDE hard drives then you may need to use Eagle Eyes old. If it has SATA drive then you need to use Eagle Eyes new. Scorpion, thanks for your reply. However, AVTECH only have one version of Eagle Eyes for iPhone... that is a total different Eagle Eyes for WINCE or other smart cell phone. The only way, I want to try is to upgrade my 604 firmware. Do you have those firmware? If yes, will you mind sending them to me? Thanks in advance! Share this post Link to post Share on other sites
