jets 0 Posted January 19, 2010 Greetings: I'm very grateful for this forum and the knowledgeable folks who provide information. I have been successful in configuring DVR's and routers for remote connection via Internet Explorer over web. I'd like to know what needs to happen in order to use a DVR's client software. In other words, the customer would need to somehow log onto, from a remote location, the network containing the DVR, then launch the the DVR client software. How does this get setup? I mostly understand the browser based stuff: I forward the router ports and then the url is the router's outside IP address followed by the forwarded port #. After adjusting active x settings, I'm able to log in. What/how needs to be configured in order to connect using client software remotely? Sorry for repeating myself. Hopefully what I am asking is clear. Any (correct) info is appreciated. Thank you Jeff Share this post Link to post Share on other sites
bike_rider 0 Posted January 19, 2010 Non-browser based viewing isn't that much different to setup than browser based. The biggest challenge is figuring out which ports to forward through the router. Share this post Link to post Share on other sites