todd2 0 Posted January 24, 2010 I have some of the KT&C bullet cams with the 90 base. By this I mean you can point the camera straight up from the base or down at any angle up to 90 degrees. For a particular application, though, I'm having a bit of a problem. I need to go farther than 90 degrees and/or have a longer or more bendable "neck" between the base and camera. The mounts I have seem to seat the camera on a little screw so I'd imagine it wouldn't be hard to use an alternative mount. Anyone know of a flex mount? Share this post Link to post Share on other sites
bike_rider 0 Posted January 24, 2010 Anther out of the box idea is to use a RAM mount. Each setup is generally 3 pieces - Ball base, rigid center peice, Ball mount top. There is a huge variety in each of the mounts. Share this post Link to post Share on other sites
tomcctv 190 Posted January 24, 2010 from one of the advertisers on the top of this page. http://www.cctvhotdeals.com/store/11-universal-mounting-brackets-for-surveillance-security-camera.html Share this post Link to post Share on other sites
