TJCCTV 0 Posted January 25, 2010 I have an original lens that I am needing to upgrade. The camera is an outside IR. Any help is greatly appreciated. The replacement lens needs, of course, to fit into the case by being same size or smaller. Here's the puzzle: I have been unable to determine the exact lens mount type. The lens slides into the body (smooth, no threads) and tightens down with a couple of set screws. Lens mount (smooth) outside diameter is 13.8 - 13.9 mm 7.2 mm - Depth What kind of lens mount is that? Don't think it is an M17 "NF Mount". 4-9mm Vari-focal Manual Iris IR Lens Per Manufacturer: C/CS Interface I don't see how.... 1/3" interline Sony SUPPER HAD color CCD Lens Dimensions (my measurements): 40.5-6 mm - Top to Bottom Height 13.8-9 mm - Lens bottom (mount) OS Diameter 27.9 mm - Lens TOP O/S Diameter 7.2 mm - Depth of mounting surface Needing to upgrade the lens from 4-9mm, but first have to determine the type of mount for one to even install. Any ideas? Thanks! Share this post Link to post Share on other sites
TJCCTV 0 Posted January 25, 2010 Attached are images of the original lens that I am needing to upgrade. Hope they are of help. Still haven't identified type of mount. It's smooth and 13.8-13.9mm, and depth of 7.2 mm. (my measurements) Thanks for helping..... Share this post Link to post Share on other sites
C.O.P. 0 Posted January 25, 2010 Are there any markings on it at all? manufacturer etc? If you have the camera, you may be able to go from there (it could be a stock lens). Google the camera model and find the specs. You should be golden after that. Share this post Link to post Share on other sites
