Allan_Riley 0 Posted April 13, 2005 I am New to CCTV and DVR systems please help. I have recently upgraded a customers setup from Video recorder to PC based DVR with a 128MB graphics card and TV out. All i did was to remove the hardware(Robot MV16i multivision plus processor, the Video machine. and the two B/W monitors) He has 10 cameras and all is working fine. The problem now is that he wants the two additional monitors added to the system at minimal cost. What will i need to split the signal, to the pc and 2 monochrome monitors. Share this post Link to post Share on other sites
Integratek 0 Posted April 13, 2005 never tried anything like that but i guess that BNC-T connector or any other signal splitter should work fine Share this post Link to post Share on other sites
baywatch 1 Posted April 13, 2005 Usually on this type of upgrade it is preferable to sort out this type of situation with the customer 1st. If their existing system is still working we would try to keep the old system totally working but extend the camera feeds to the computer, easy if the multiplexer has video in & out. The problem with these situations is that normally the customer doesn't realise that he still wants the old monitors until they have gone. Share this post Link to post Share on other sites
