Jump to content
tomdlgns

system log file message

Recommended Posts

it happens random, but i see this message pop up. my only option is OK, but the box goes away on its own.

 

No new entry will be added to the system log file if the storage capacity of the system log file is lower than the requirement.

 

our company has about 12-15 DVRs out in various locations. this started happening to two DVRs at different times within the past month.

 

the computers are on 24/7 with battery backups and i have checked the log files, event viewer and even the nic card connection time...power never went out or even flickered off.

 

video files still seem to record w/o any issues. i randomly picked files to view under playback and they play fine.

 

this is what i have tried before making this thread.

 

reboot the PCs

delete all the video files in the store folder

run the db repair utility.

 

also, all video files are stored on a second hard drive in the system.

i already checked the log file store location and it is set to recycle (check in the box) and the number of days option is NOT checked.

 

any help is appreciated.

 

thanks.

Share this post


Link to post
Share on other sites

Your system log file is normally (default) on drive c: under the folder of GV600 (for example) . This is different from the folder of the video files. It means that your drive C: might be already full or have only little space left for the system to store the log files. One way is to delete some files not needed in drive c:

 

One can try to change the location of the system log file to another partition where there is enough space.

 

System log file can be found under Configure, System log setting, Set location (for Version 8.32)

 

Hope this helps.

Share this post


Link to post
Share on other sites
Your system log file is normally (default) on drive c: under the folder of GV600 (for example) . This is different from the folder of the video files. It means that your drive C: might be already full or have only little space left for the system to store the log files. One way is to delete some files not needed in drive c:

 

One can try to change the location of the system log file to another partition where there is enough space.

 

System log file can be found under Configure, System log setting, Set location (for Version 8.32)

 

Hope this helps.

 

 

that is what i thought as well, but when i check to see where the file goes, it shows the f: drive, which is the same drive i record the video files to.

 

well, that is what i am forced to believe. unless the geovision programmers did a poor job of coding the interface. i am going to double check now.

 

Thanks.

Share this post


Link to post
Share on other sites

i am looking at a DVR with 8.01 software.

 

not sure where to change it here.

 

the only thing i can see to change is the video log.

 

i suppose since this was the only field i could actually change to a location other than the c:, i thought it was for the log file as well.

 

if anyone knows how to change it in 8.01 i would appreciate the help.

 

my c drive is 96GB in size and i only have 495 remaining (all video storage records to my 500GB or 1TB drive, not sure which one is in the system off hand, which is F: in this environment), so yes, something is recording to the c: but i only knew of one area to change it in under GeoVision.

Share this post


Link to post
Share on other sites

As mentioned system log should just be on the C drive (or you could crate a small partition just for the logs and restoring for example using a bootagent to select a drive and restore an image, and do even more but for the sake of this issue will keep to the basics)

 

Stop all recording and exit

Enable Recycle Bin of 1% on C Drive.

Disable Recycle Bin on other drives.

Disable Hibernation Completely.

Disable System Restore Completely

Disable Updates of ANY kind

Resize Page File/Check - make it same min and max, use the max/recommended size for both

Download and Run Windows Cleanup! http://www.tucows.com/preview/405276

Defrag.

 

Move system log to the C drive, check the C drive for any install files/folders, etc. Make sure you are not recording to the C drive. You should have tons of space on C as XP takes up very little itself and Geo is not that large either. Basically you will need to make sure you have enough space for 1% of the hard drive which will be the recycle bin, though it wont be that size to begin with that is how large it could get, unlikely though in this type of system, also the page file takes up space, but even so you should have perhaps 85-90Gb free space on C with a 96GB (100GB?) drive, default XP alone only takes up 700-900 MB (not including page file, etc, varies in size depending on XP installed drivers etc).

Share this post


Link to post
Share on other sites
As mentioned system log should just be on the C drive (or you could crate a small partition just for the logs and restoring for example using a bootagent to select a drive and restore an image, and do even more but for the sake of this issue will keep to the basics)

 

Stop all recording and exit

Enable Recycle Bin of 1% on C Drive.

Disable Recycle Bin on other drives.

Disable Hibernation Completely.

Disable System Restore Completely

Disable Updates of ANY kind

Resize Page File/Check - make it same min and max, use the max/recommended size for both

Download and Run Windows Cleanup! http://www.tucows.com/preview/405276

Defrag.

 

Move system log to the C drive, check the C drive for any install files/folders, etc. Make sure you are not recording to the C drive. You should have tons of space on C as XP takes up very little itself and Geo is not that large either. Basically you will need to make sure you have enough space for 1% of the hard drive which will be the recycle bin, though it wont be that size to begin with that is how large it could get, unlikely though in this type of system, also the page file takes up space, but even so you should have perhaps 85-90Gb free space on C with a 96GB (100GB?) drive, default XP alone only takes up 700-900 MB (not including page file, etc, varies in size depending on XP installed drivers etc).

 

thanks for the post rory.

 

i am still a little confused. how am i able to change the default store of the log file?

 

i clearly see how i am able to relocate the log file for my video files, but that is obviously different.

 

thanks.

Share this post


Link to post
Share on other sites

thanks for the post rory.

 

i am still a little confused. how am i able to change the default store of the log file?

 

i clearly see how i am able to relocate the log file for my video files, but that is obviously different.

 

thanks.

You should be a ble to change it under the log settings section .. I dont have a geo here to be able to say where exactly it is but its there somewhere with the other log settings. Optionally you can open C:\Windows\GeoMulti.ini and change the log folder there.

Share this post


Link to post
Share on other sites

thanks for the post rory.

 

i am still a little confused. how am i able to change the default store of the log file?

 

i clearly see how i am able to relocate the log file for my video files, but that is obviously different.

 

thanks.

You should be a ble to change it under the log settings section .. I dont have a geo here to be able to say where exactly it is but its there somewhere with the other log settings. Optionally you can open C:\Windows\GeoMulti.ini and change the log folder there also.

 

yeah, strange, i will look again, but i didnt see it. only for the video log, which is why i was confused on where it was being saved.

 

i am going to try your optional method right now.

 

thanks.

Share this post


Link to post
Share on other sites

here is part of the .ini file

 

[General]

LogLocationNum=1

LogEntry0=F:\history1\

WorkEntry=0

InstallPath=C:\GV1480\GV1480.exe

Share this post


Link to post
Share on other sites
here is part of the .ini file

 

[General]

LogLocationNum=1

LogEntry0=F:\history1\

WorkEntry=0

InstallPath=C:\GV1480\GV1480.exe

 

Yes thats it right there, change it to

LogEntry0=C:\GV1480\

 

Save, make sure Geo is not running, or restart.

 

Did you clean up the C drive and make sure the video is not recording to that?

Share this post


Link to post
Share on other sites
here is part of the .ini file

 

[General]

LogLocationNum=1

LogEntry0=F:\history1\

WorkEntry=0

InstallPath=C:\GV1480\GV1480.exe

 

Yes thats it right there, change it to

LogEntry0=C:\GV1480\

 

Save, make sure Geo is not running, or restart.

 

Did you clean up the C drive and make sure the video is not recording to that?

 

 

huh?

 

the f drive is my video store...i want the video to record to the f:.

 

now i am really confused.

Share this post


Link to post
Share on other sites

 

 

huh?

 

the f drive is my video store...i want the video to record to the f:.

 

now i am really confused.

 

Log Entry has nothing to do with the video store.

What was taking up all the space on C?

Share this post


Link to post
Share on other sites

 

 

huh?

 

the f drive is my video store...i want the video to record to the f:.

 

now i am really confused.

 

Log Entry has nothing to do with the video store.

What was taking up all the space on C?

 

 

i dont know man...all my video is recording to the f: like the ini file says.

 

i will grab a screen shot for you in a few min...this is nuts!

 

according to geovision program, f: is my video store location.

 

i will take a screen shot of the box.

 

i have never had this issue before and this isnt my first DVR.

Share this post


Link to post
Share on other sites

i dont know man...all my video is recording to the f: like the ini file says.

 

i will grab a screen shot for you in a few min...this is nuts!

 

according to geovision program, f: is my video store location.

 

i will take a screen shot of the box.

 

i have never had this issue before and this isnt my first DVR.

 

upload the multi.ini file somewhere .. Its been a while but I dont think that logentry is the recording. . but I could be wrong. Also, what folder did you set for recording? history1 doesnt sound like something to be used for video. I dont have a complete multi.ini file here to reference and I would need to go digging through external drives and my code for one from before ..

Share this post


Link to post
Share on other sites

this is from 8.1, should be similar in 8.01

Note: the System Log Setting menu item

121805_1.gif

Share this post


Link to post
Share on other sites

i dont know man...all my video is recording to the f: like the ini file says.

 

i will grab a screen shot for you in a few min...this is nuts!

 

according to geovision program, f: is my video store location.

 

i will take a screen shot of the box.

 

i have never had this issue before and this isnt my first DVR.

 

upload the multi.ini file somewhere .. Its been a while but I dont think that logentry is the recording. . but I could be wrong. Also, what folder did you set for recording? history1 doesnt sound like something to be used for video. I dont have a complete multi.ini file here to reference and I would need to go digging through external drives and my code for one from before ..

 

i created the history1 folder on my own...

 

121812_1.jpg

 

that is what i have.

Share this post


Link to post
Share on other sites

here is the

 

my computer

history

cam01

contents of cam01 in detail view to show that it is still recording to the f: even with the error.

 

i only have 2 days worth of data because i deleted the contents of the history folder yesterday thinking it would fix the error.

 

i didnt need any of the video, so the loss of video files was not an issue.

 

121814_1.jpg

Share this post


Link to post
Share on other sites

 

i created the history1 folder on my own...

 

121812_1.jpg

 

that is what i have.

Ok then that is the video log location so yeah dont change it

Share this post


Link to post
Share on other sites

ignore the fact that i missed one folder view:

 

f:\history1\

 

my bad, but the only thing you would see in there are the cameras in folder views

 

cam01

cam02

cam03

cam04

cam05

cam06

cam07

cam08

cam09

Share this post


Link to post
Share on other sites

 

i created the history1 folder on my own...

 

121812_1.jpg

 

that is what i have.

Ok then that is the video log location so yeah dont change it

 

haha, thanks.

 

see why i am going nuts now....

Share this post


Link to post
Share on other sites
here is the

 

my computer

history

cam01

contents of cam01 in detail view to show that it is still recording to the f: even with the error.

 

i only have 2 days worth of data because i deleted the contents of the history folder yesterday thinking it would fix the error.

 

i didnt need any of the video, so the loss of video files was not an issue.

 

121814_1.jpg

 

yeah but thats all the video Log, your error is with the System Log which is different - video log is the recorded video, system log is just a log of what the system does. Id have to check where that is located in the INI files or registry but you can change it right from the menu as in the sample image I posted.

 

Just make sure C is clean and there is enough room on it for the system drive to exist there. From previous post you said there was only 495mb of space left?

Share this post


Link to post
Share on other sites
here is the

 

my computer

history

cam01

contents of cam01 in detail view to show that it is still recording to the f: even with the error.

 

i only have 2 days worth of data because i deleted the contents of the history folder yesterday thinking it would fix the error.

 

i didnt need any of the video, so the loss of video files was not an issue.

 

121814_1.jpg

 

yeah but thats all the video Log, your error is with the System Log which is different - video log is the recorded video, system log is just a log of what the system does. Id have to check where that is located in the INI files or registry but you can change it right from the menu as in the sample image I posted.

 

Just make sure C is clean and there is enough room on it for the system drive to exist there. From previous post you said there was only 495mb of space left?

 

 

yes.

 

2 things

 

1. i didnt see your post with the picture, i am checking that next (skipped over it with all the posting we did)

2. i didnt follow your directions until i cleared up the f: location. now that we are on the same page, i am going to do what you said.

 

this PC is ONLY for the geovision program. nothing else should be on the c drive.

 

how big is the log file going to get? better yet, how big does it get before it starts to overwrite itself?

Share this post


Link to post
Share on other sites

It seems the system log is located in the MDB folder (database) , in the main access database file

 

in geoMulti.ini

 

[MDB]

Location=C:\MultiCam\

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×