Plasma 0 Posted March 1, 2010 Hey folks, I currently have a CCTV card that works fine for what I used to use it for but my requirements have changed so I may be looking to swap to some different software. Happy to pay for it if needs be I'm not necessarily looking fro a free ride here! Its a 4 Input card capable of 100FPS and cost around £150 when new, I got it from a friend hence the vagueness of my knowledge, the Specs and details off the card are: PLX Technologies PC16140-AA33PC A0512A MJ675 Taiwan ATMEL AT89C2051 4 x video chips but can't get the chip id as they have Silver heat Sinks I've been using it with the Wave-P v8.2.2.0 software so it currently has drivers that Identify it as 4 x "Wave-P Video Capture Device". Though I seem to remember my friend using it with other software first. Manufacturer in Windows 7 device manager is Identified as SAA7130. Hardware ID is PCI\VEN_113&DEV_7130&SUBSYS_00001131&REV_01 So my question ... is there any other software that I might look at to give me better useability remotely. I have an iPhone 3GS and if I could view it remotely using any app or Safari Browser then I'd be a happy bunny! Any info much appreciated! Cheers Plasma Share this post Link to post Share on other sites
Plasma 0 Posted March 1, 2010 Manufacturer in Windows 7 device manager is Identified as SAA7130 Don't ya hate it when you post a question then 5 minutes later find part of the answer... Ok so I think the card is identified as a "Philips SAA7130" and a reasonable driver for it might be .. Philips SAA7130 WDM Video Capture driver Which I have now downloaded, so I guess I'm now looking for CCTV Software recommendations, preferably that are remote / iPhone friendly. Cheers Plasma Share this post Link to post Share on other sites
