rory 0 Posted March 4, 2010 Hi, Well im looking for something specific. I need something that can take up to 8 cables, basically just some kind of clip. So you snap the cable into the groove and it holds it, simple. its for RG59 video cable only. I want to be able to attach this, to say a wall, or some wood, its just a strip to hold the wire aligned side by side. It is for a specific purpose I cant really get into right now. Ok its like this, but only it is in one long strip up to 8 cables: Also it would be upside down, the cable has to clip into it, and be easy enough to release if need be. http://www.radioshack.com/product/index.jsp?productId=2255013 more something like this: Screw would go where grey arrows are. or even something else to hold it down: Any ideas are welcomed. thanks, Rory Share this post Link to post Share on other sites
Soundy 1 Posted March 4, 2010 I have some crimp-on types of those, but I don't know where you'd get twist-ons... *running and hiding* Share this post Link to post Share on other sites
rory 0 Posted March 4, 2010 I can still see you on a serious note you see where im going with this? Actually maybe 4 piece is better .. its for pigtails from DVRs and Im looking at plastic enclosures and VGA extenders. Guess I can always get a plastic place down here to make everything for me from scratch .. $$ though. Share this post Link to post Share on other sites
Soundy 1 Posted March 4, 2010 Yeah, I can see that being useful for the 'pigtails' (we call it an octopus cable). Share this post Link to post Share on other sites
jeromephone 6 Posted March 8, 2010 Look up caddy fasteners they have a lot of cable support items which are for data and 110 they may have something that you can make work. It not like what you are showing but they do provide some nice ways to organize cable. Share this post Link to post Share on other sites
hardwired 0 Posted March 8, 2010 Had a thought... On an old Camaro I had, I used some brackets that held the sparkplug wires in line like that, and they were about the same diameter as RG59, you might try some of those. Share this post Link to post Share on other sites
WRS_Mark 0 Posted March 8, 2010 Had a thought... On an old Camaro I had, I used some brackets that held the sparkplug wires in line like that, and they were about the same diameter as RG59, you might try some of those. That was my first thought as well. Any local auto part supplier should have a set of clips which will hold 4-8 spark plug wires. The only thing which you may have to do is figure out how to fasten it to a surface. Can you use an adhesive? Share this post Link to post Share on other sites
thewireguys 3 Posted March 8, 2010 Hi, Well im looking for something specific. I need something that can take up to 8 cables, basically just some kind of clip. So you snap the cable into the groove and it holds it, simple. its for RG59 video cable only. I want to be able to attach this, to say a wall, or some wood, its just a strip to hold the wire aligned side by side. It is for a specific purpose I cant really get into right now. Ok its like this, but only it is in one long strip up to 8 cables: Also it would be upside down, the cable has to clip into it, and be easy enough to release if need be. http://www.radioshack.com/product/index.jsp?productId=2255013 more something like this: Screw would go where grey arrows are. or even something else to hold it down: Any ideas are welcomed. thanks, Rory They have that exact setup at Home Depot I just can't think of who makes them. Share this post Link to post Share on other sites
