wireless spy camera installation problem

[superxie 0]

Hello,everyone!

I just bought a Remote Control wireless spy Camera. Its called a 2.4G Wireless Audio / Video transmitter and receiver / 3500 mW, if this helps.

Anyway the instuction manual is very poor to understand. The dome has the usual leads,but there are four coloured wires red/blue/green/yellow. This is to connect to the Reciever box. This is the problem,which wire goes where to the reciever box. There are 5 connectors from left power socket. Also there is 8 dip switches on the dome

Hope somebody here may help me out! Thanks!

[victoria01 0]

You can try to contact the website you bought the hidden camera from , they have to give you tech support for it , or give you a number of someone who can .

The 8 dip switches in the back , are they all in the same group . if that is so , then its the camera id - each 1 has on and off ,

if you turn 1 on it will give you id 1 , if you put 1 and 4 on you will get 9 and that would be the new camera id .

[hardwired 0]

Ahhh, the joys of offshore products.... Limited documentation, questionable specs, and no support. By the way, you should know that 3500mW output at 2.4 GHz is well above the legal limit allowed in most countries. Those antennas look to be about 6dBi gain, which gives you 14 Watts Effective Radiated Power, over three times the limit in the U.S., it's less in most of Europe.