mypont2 0 Posted March 10, 2010 Does anyone know if and how I can control a Panasonic WV-CW964 using Pelco D protocol? I am using a Verint S1708e Encoder using ONSSI software. ONSSI will only support Pelco D, P and JVC protocols. Any help would be appreciated. Thanks, Share this post Link to post Share on other sites
hardwired 0 Posted March 10, 2010 See my response to your other post... Share this post Link to post Share on other sites
empak 0 Posted April 12, 2010 I have controlled the Panasonic smart domes with the Pelco D protocol. It did not work very well for me, as it was hard to setup without the controller, I had it on a Digital Watchdog DVR. There was no Panasonic protocol listed on this DVR, I ended up getting the controller from Panasonic just for the setup and moved it back to the dvr's Pelco protocol. (it was not part of the system quote... so now it sits in a box waiting for the next time i need it, kind of a expensive learning exp.... if you phone tech support, they will give you the dip switch settings to make it work with Pelco D..... tell them that you have no other option but to use Pelco. also ask them if there is a way of getting into the setup mode using that code. empak Share this post Link to post Share on other sites
