aqsath 0 Posted March 15, 2010 How can i access my Honeywell ACUIX IP in VideoLan Software? RTSP preferrable Share this post Link to post Share on other sites
estoll 0 Posted March 16, 2010 Accessing the RTSP on HW IP cameras is kind of simple, but there's a little trick to it: 1. Open VLC Media Player and go to Media > Open Network 2. Select RTSP from the protocol list 3. In the address field type the IP address and then /PRES (all caps). See the attached picture for how I connect to my Honeywell cameras. Let me know if that works. Share this post Link to post Share on other sites
aqsath 0 Posted March 16, 2010 wow.. it works. thanks mate. but my ask one question? in my VLC, the video just play a few seconds. May i get it any longer? Share this post Link to post Share on other sites
estoll 0 Posted March 17, 2010 I haven't had any issues with playing the RTSP stream from that camera for over a minute. Check and see if there is a firmware upgrade available for your camera. Share this post Link to post Share on other sites
aqsath 0 Posted March 17, 2010 i'm sorry that's my bad.. i forgot to turn off my firewall.. Now i can view my cctv through VLC. Thanks a lot mate.. Share this post Link to post Share on other sites
Twilo123 0 Posted April 2, 2010 is there a jpg/mjpg http stream url also? Share this post Link to post Share on other sites
