mscema914 0 Posted March 15, 2010 Hello, we lost our previous dome-enclosed Pelco-D formatted pan/tilt/zoom camera to a gravitational accident. I am still seeking the specifications on the previous assembly but know it wasn't a Pelco brand and the camera is a Sony of some sorts. It was a pendulated enclosed dome with the wires feeding directly into the top while it was mounted on an antenna assembly atop a Wil-Burt mast. What is the recommended type of camera for this operation? I've seen a few different configurations and costs into the thousands to replace it with. At a loss of where to start.... Tommy Thompson Memphis/Shelby County EMA Share this post Link to post Share on other sites
tomcctv 190 Posted March 15, 2010 Hello, we lost our previous dome-enclosed Pelco-D formatted pan/tilt/zoom camera to a gravitational accident. I am still seeking the specifications on the previous assembly but know it wasn't a Pelco brand and the camera is a Sony of some sorts. It was a pendulated enclosed dome with the wires feeding directly into the top while it was mounted on an antenna assembly atop a Wil-Burt mast. What is the recommended type of camera for this operation? I've seen a few different configurations and costs into the thousands to replace it with. At a loss of where to start.... Tommy Thompson Memphis/Shelby County EMA Hi Tommy. if it is just a repacement camera you are looking for then its just a matter of a bit of mod to your mast. to take another camera. this is a very good camera which sould fit no problem. http://www.cnbtec.com/en/html/product/product.php?seqx_prod=363 Share this post Link to post Share on other sites