mr_larry 0 Posted March 26, 2010 I have an AverMedia NV6240 system running 9 cameras in my apartment building. The main PC running the cameras is down in a storage closet in my basement. As the building manager, I have a run of Cat-5e about 100 feet long, directly into my apartment and connected to my network so that I can monitor the cameras from time to time. I used to have a dedicated PC running Remote AP in my apartment to a separate monitor. Recently I updated my main PC to Windows 7 64-bit and began running Remote AP from my main computer with two monitors, one dedicated to the output of the surveillance feed. When I first start up Remote AP, it uses about 54,000 K in memory, and about 5-6% of the processor's resources. All nine cameras display properly running 4 frames per second. After a few hours, the memory spools up to about 500,000 k in memory and 50-60% of my processor usage. The frames of the nine cameras only update once every few seconds. I have 4 gigs of RAM and a 2.5 gigahertz Intel Core 2 Duo processor. My graphics card is an NVidia GeForce 7300 LE that supports two monitors. Is it possible my RemoteAP program got corrupted when I dragged it over to my new system? I never had the problem before. Is there a better way to stream the cameras on my network? I like the RemoteAP software because I can review events from my apartment. Any help would be appreciated. Share this post Link to post Share on other sites
Mnorman 0 Posted March 28, 2010 My guess would be that it is the software interface with Windows 7 x64. Avermedia right now doesn't like x64 very much, so that is why x86 or 32bit is recommended. The system resources being used looks like a memory leak from the software to me. I don't know of any fix or work around, I think we are all just waiting for more support from Avermedia. Share this post Link to post Share on other sites
mr_larry 0 Posted March 28, 2010 I don't think it is the Windows 7 64 bit system that is causing the problem. I failed to mention that I first migrated the Remote AP program to my computer when it was running 32-bit Windows XP and the same thing happened. That was part of the reason to move to the 64-bit version of Windows 7: I thought It would use the memory better. Where can I download a fresh copy of of the Remote AP application? Is it bundled with the rest of the software? Share this post Link to post Share on other sites
tomcctv 190 Posted March 28, 2010 I don't think it is the Windows 7 64 bit system that is causing the problem. I failed to mention that I first migrated the Remote AP program to my computer when it was running 32-bit Windows XP and the same thing happened. That was part of the reason to move to the 64-bit version of Windows 7: I thought It would use the memory better. Where can I download a fresh copy of of the Remote AP application? Is it bundled with the rest of the software? Hi larry. i have just PM you with the remote ap the avers up to date Share this post Link to post Share on other sites
