SprinTech 0 Posted April 3, 2010 Hello, Just joined here, and here is my question: One of my customers has been having theft problems in their store (Consignment shop 1200sqft or so), so they've decided to get a camera system, now I've done some CCTV work in the past, mostly for my own purposes only though (In my offices, and shops). But I'm having a tough time finding a system that I feel comfortable recommending and selling them. They are not needing to cover the whole store only parts of it, so the 5-8 camera range is what they are looking at. Also price is a LARGE factor, they can't go much above $500 (Low I know) Can anyone tell me if this is a bad system, or whatnot? Also from what I've seen the only issues anyone was having was that the software wasn't the easiest to deal with. Here is the one I'm looking at: http://aposoniccctv.com/Products/Surveilance/2008/A-BN9B5-C500/A-BN9B5-C500.html DVR Specs: MONITORING Video Input 8 x BNC Video Output 1xBNC, 1X VGA, 1X S-Video out Display Rate 240fps (NTSC), 200fps (PAL) RECORDING & PLAYBACK Compression Enhanced Motion JPEG Recording Rate 60/fps/50fps Recording Mode Continuous/Motion Detection/ Sensor Search Mode Date & Time, Event SYSTEM Languages English, Chinese Storage 1 x SATA HDD Slot (Max 1TB) Data Export Medium 2 x USB 2.0 Slot NETWORK Connection 1 x 10/ 100MB Ethernet (RJ-45) Protocols Static IP, DHCP, PPPoE, DDNS (Through Router) Remote Control Remote Client Software and IE browser INTEGRATION Audio In/Out 1 / 1 Alarm In/Out DI/DO for Sensor/Alarm Motion Detection Yes User Interface Front Panel Buttons OTHER Dimensions (W x H x D) 2.5 x 11.75 x 11-inches (H x W x D, approximate) Operating Temperature 0 ~ 45 ˚c Operating Humidity 0~90 % Power Input: 100-240V ~ 50/60Hz, 1.8A Output: 12V --- 5A Camera Specs: (5 Cameras) Image Device 1/3" CCD sensor Scanning Frequency NTSC: 15,734KHz(H),60Hz(V); PAL: 15,625KHz(H),50Hz(V) Scanning System NTSC: 525 line 2:1 interlace PAL:625 lines 2:1 interlace Effective Pixels NTSC: 512(H) x 492(V); PAL:512(H) x 582(V) Electronic Shutter N:1/60- 1/100,000sec (Auto); P:1/50-1/100,000sec (Auto) Horizontal 420 TV Lines White-balance Auto white balance (2500°K~9500°K) Synchronizing System Internal Sensitivity 0.2 Lux , 0 Lux at IR on / F2.0 BLC Auto Signal to Noise More than 48dB AGC off AGC Yes Gamma Correction 0.45 IR Distance 10 Meters (Based on: object of view reflected IR light) IR LED LED x 23 pcs IR Status Under 10 Lux by CDS auto control IR View Angle View angle: 70°, Beam spread: 40°/per LED IR Wavelength 850nm ± 25nm LED Life More than 10,000 hours Lens 6 mm Standard (4,8mm option) Power Consumption IR on: 230mA, IR off: 70mA ± 5mA Power Supply 12V DC 400mA ± 10% Temperature Operating: -10 to 50°C Video Output Composite 1.0 Vp-p at 75 ohm Construction Aluminum with sunshield weatherproof Dimensions 54(∮) x 83(L) mm Weight 350 g It also includes the cables (RG59 and power). Just wondering if anyone has used Aposonic systems before, and how they are. I know it's a rather low-end system (not super low end but lower end anyways), but i think it should work well. feel free to PM or e-mail me as well, Thanks Chris LMC Computers - Soon to be Sprinter Technology Services Plover WI sales@lightningmods.com Share this post Link to post Share on other sites
tomcctv 190 Posted April 3, 2010 For $500 the best thing for you to do for your customer ........ is say sorry but i cant do anything for that price. which is a lot better than your customer calling you everything under the sun if you sell him the system you have posted. it is very bottom end crap. Share this post Link to post Share on other sites
bpzle 0 Posted April 3, 2010 tom's right. there's no way... there's no way you could stay in that budget at dealer prices, much less be able to mark something up and resell. rediculous... tell them to go to Sam's Club and walk away. Share this post Link to post Share on other sites
SprinTech 0 Posted April 3, 2010 Thanks for the input, do you think this system is worse than what you could get at say Sam's club? Just wondering because they need something pretty quick, and they can by no means afford a decent system, I don't mind not making a lot off the system because I make alot off of the IT services so it makes up for it. I'm not necessarily looking for the highest best system, mainly because they just want to be able to record a few hours of video to be able to play back if items are stolen, and they also want them there because they feel like the cameras just being there should cut down on theft. They don't care about them being outdoors, or about night vision. Share this post Link to post Share on other sites
bpzle 0 Posted April 3, 2010 Better or worse than Sam's Club systems? Ones crap and one's crappier. lol Who cares... Either way, you install crap you'll have too many nightmares supporting crap. If they want cheap, make them install it themselves. Trust us, you don't want anything to do with it. They need to realize their budget is not realistic, even at your COST. So they can't they afford cameras, can they afford NOT to have them?? Maybe this will put things into perspective for them... A lot of small businesses don't want to fork out the cash until they realize the ROI. If you just can't walk away from these guys... offer to put some dummy dome cameras in. Eclipse makes realistic ones... Another option would be to get a DVR, hard drive, a single real camera, and some dummy cameras to stay within their budget. Later down the road swap the dummies out with real ones. Look at the 4 channel Avermedia Eb1304 DVR. Then the Eclipse ECL-599 for a single camera. Share this post Link to post Share on other sites
Aposonic 0 Posted February 10, 2011 (edited) For $500 the best thing for you to do for your customer ........ is say sorry but i cant do anything for that price. which is a lot better than your customer calling you everything under the sun if you sell him the system you have posted. it is very bottom end crap. If you thought aposonic's DVRs are cheap and crappy, then 95% of DVRs from other vendors in USA is even cheaper. It's just pricing strategy. Don't think the higher the price, the greater the quality in security market. You just don't know what you don't know. However, in Chris's case, I had recommended him over phone not to purchase the $500 system which was for low-budget users. Well, update for you guys that many 16-ch systems are less than $600 now, you may try Regards, Nelson APOSONIC CCTV http://www.aposoniccctv.com Edited February 10, 2011 by Guest Share this post Link to post Share on other sites
bpzle 0 Posted February 10, 2011 If you thought aposonic's DVRs are cheap and crappy, then 95% of DVRs from other vendors in USA is even cheaper. It's just pricing strategy. Don't think the higher the price, the greater the quality in security market. You just don't know what you don't know. I will agree that price should not always be equated with value. Care to fill in the blanks for us on the VALUE of your products? I cannot personally vouch for them, so you have the floor. And please, limit the "spec sheet" material that can easily be Google'd. Share this post Link to post Share on other sites
tomcctv 190 Posted February 10, 2011 For $500 the best thing for you to do for your customer ........ is say sorry but i cant do anything for that price. which is a lot better than your customer calling you everything under the sun if you sell him the system you have posted. it is very bottom end crap. If you thought aposonic's DVRs are cheap and crappy, then 95% of DVRs from other vendors in USA is even cheaper. It's just pricing strategy. Don't think the higher the price, the greater the quality in security market. You just don't know what you don't know. However, in Chris's case, I had recommended him over phone not to purchase the $500 system which was for low-budget users. Well, update for you guys that many 16-ch systems are less than $600 now, you may try Regards, Nelson APOSONIC CCTV http://www.aposoniccctv.com sorry nelson but i think your 95% is to high. $600 is way to low for even a budget 16 way dvr. and can i point out they is no such thing as a budget user. its not the user he is your customer its the dvr that is budget. many installers know what the lowest price should be before they start buying bad quality and also you have two types of what i call budget. unbranded budget system = no support and very limited. branded budget systems = support / updatable you are right systems are becomming cheaper. but if someone asked me for a good dvr i have in my mind what has the good quality/fps/ and the support. and then price. what is just about to come into force in the uk is the lowest limit a cctv system can be used. (and its about time) Share this post Link to post Share on other sites
Aposonic 0 Posted February 11, 2011 $600 is 2 low but many e-tailers are selling at that price. Hard to imagine, but do you think most buyers know what the differences are? They just care price. So there is a budget buyer and there are many now! I deal with them from Mon to Fri. Curiously, what is the good DVR you will use? Over 90% of DVRs are OEN from China, Taiwan, and Korea. We have tight connection with these major manufacturers. Please let me know and I'd understand where your preference is. Share this post Link to post Share on other sites
rory 0 Posted February 11, 2011 Its been my experience that the majority of end users factor price into the equation first. So budget is priority. Either they can afford it or not. Find out what their budget is before going any further, you can root out the time wasters that way also. Doesnt mean you have to quote or sell them junk, but there are quality budget products out there now, and there are more budget oriented end users than there are not. Share this post Link to post Share on other sites
bpzle 0 Posted February 11, 2011 Its been my experience that the majority of end users factor price into the equation first. Most of the customers I come in contact with care more about the value. And if they don't, I tell them to go to Costco. Share this post Link to post Share on other sites
rory 0 Posted February 11, 2011 Its been my experience that the majority of end users factor price into the equation first. Most of the customers I come in contact with care more about the value. And if they don't, I tell them to go to Costco. Value, or Quality? Ofcourse Value for money is still part of a Budget installation, choosing the right product for the job. Share this post Link to post Share on other sites
bpzle 0 Posted February 11, 2011 Price does not equal value Share this post Link to post Share on other sites
rory 0 Posted February 11, 2011 Price does not equal value So your clients have endless pockets? Especially in this recession? Value for money, best bang for buck, thats what its all about. Regardless of the client, first thing you should ask is what is their budget. If they dont have a budget, then knock yourself out, but that is rare in this day and age. Share this post Link to post Share on other sites
bpzle 0 Posted February 11, 2011 Price does not equal value So your clients have endless pockets? Especially in this recession? Value for money, best bang for buck, thats what its all about. Regardless of the client, first thing you should ask is what is their budget. If they dont have a budget, then knock yourself out, but that is rare in this day and age. I disagree. In the right environment, you can choose your clients. Not the other way around. Share this post Link to post Share on other sites
rory 0 Posted February 11, 2011 I disagree. In the right environment, you can choose your clients. Not the other way around. In the perfect environment I could lay on the beach all day long, not have to work for a living. Share this post Link to post Share on other sites
bpzle 0 Posted February 11, 2011 I disagree. In the right environment, you can choose your clients. Not the other way around. In the perfect environment I could lay on the beach all day long, not have to work for a living. LOL! Point taken... But seriously... I feel pretty lucky. Share this post Link to post Share on other sites
rory 0 Posted February 11, 2011 I disagree. In the right environment, you can choose your clients. Not the other way around. In the perfect environment I could lay on the beach all day long, not have to work for a living. LOL! Point taken... But seriously... I feel pretty lucky. 1x $10,000 job is not enough for me, I want 1x $10,000 job plus 3000x Budget $1000 jobs (yes $1000 is a budget job here). I want to be the King of the World!! Hey was checking into business names here, checked CCTV King, just for grins and giggles, the local registrar that deals with business names said KING is a prohibited word LOL. Share this post Link to post Share on other sites
ak357 0 Posted February 11, 2011 Price does not equal value So your clients have endless pockets? Especially in this recession? Value for money, best bang for buck, thats what its all about. Regardless of the client, first thing you should ask is what is their budget. If they dont have a budget, then knock yourself out, but that is rare in this day and age. I disagree. In the right environment, you can choose your clients. Not the other way around. Good for you for BPZLE u have healthy attitude but I would say no such thing as right environment We have to create environment it is easy to think small ( cheap dvr, cnb , kt&c camera and so on...) guess what u gonna get just joking I know that u know it is up to you to create your clientele Do u wanna be big or ........... well I should stop Share this post Link to post Share on other sites
kccustom 0 Posted February 11, 2011 I had an aposonic 4ch dvr that recorded in 2cif that was a great little unit. Sometimes you get lucky. Share this post Link to post Share on other sites
rory 0 Posted February 11, 2011 it is easy to think small ( cheap dvr, cnb , kt&c camera and so on...) Using those products is hardly "thinking small". Its CCTV, they work, they do the job, and we get paid. Besides the "big boys" dont come on an internet forum looking for customers. Share this post Link to post Share on other sites
ak357 0 Posted February 11, 2011 it is easy to think small ( cheap dvr, cnb , kt&c camera and so on...) Using those products is hardly "thinking small". Its CCTV, they work, they do the job, and we get paid. Besides the "big boys" dont come on an internet forum looking for customers. 1. I was not talking about you ..Rory kinda funny u respond 2. if u notice I don't advertise my self at all look if i have signature with my website and look at yours so who is looking for customers ? or may be explain to me please Who are "big boys" ? Thx Share this post Link to post Share on other sites
rory 0 Posted February 11, 2011 it is easy to think small ( cheap dvr, cnb , kt&c camera and so on...) Using those products is hardly "thinking small". Its CCTV, they work, they do the job, and we get paid. Besides the "big boys" dont come on an internet forum looking for customers. 1. I was not talking about you ..Rory kinda funny u respond 2. if u notice I don't advertise my self at all look if i have signature with my website and look at yours so who is looking for customers ? or may be explain to me please Who are "big boys" ? Thx 1-I have a right to respond, you mentioned product lines that I and Many others on this forum utilize. I was simply correcting your error in judgement. 2-Other than personal PMs? Yes you are correct you have no signature. Besides its funny you would think I was talking about you, other than just making a general statement about the difference between small thinking and big thinking. As for mine, visit my links and then tell me what they are exactly, links back to my site, or popups that close out once you click the window? You will see how much advertising is done through them, which is 0, I dont even have a link back to my site here besides the text thing in the sig, which is not even a link and its directing people to free stuff - the links are simply there to HELP members of the forum that is all. I dont do any sales on my site and as far as the minimal part of it that is CCTV, that only caters to BAHAMIANS of which there are NONE on this forum, except me. Oh, and Big boys are big boys, the ones that dont just "think big" but actually make it big, thats all, was just staying on topic. Share this post Link to post Share on other sites
bpzle 0 Posted February 11, 2011 Personally, I think diverse thinking is the key to success... Look at some of the most successful businsses, they don't just "do" one thing... Here in Texas, no one is impressed with a "one trick pony." I think near sighted, short term gain and ultimatley greed, even arrogance make you go bankrupt and fail in any business or aspect of life. Old habits die hard though... What we "do" today is what defines us tomorrow. I'm 25... I hope tomorrow is better for me. Share this post Link to post Share on other sites
bpzle 0 Posted February 11, 2011 And by the way... I never defined what I meant by "enviornment." Share this post Link to post Share on other sites