Jump to content
Sign in to follow this  
Luis M.

Small Installation CCTV System

Recommended Posts

Hi every1!

 

I would be very gratefull to have some wise help on installing a small and simple cctv system for my cafe bar.

 

My questions are about what cable and connectors to use.

 

I have 6 of these domes (sorry about the unregistered thing)

 

And this DVR

 

I need about 200m of cheap cable, doesn't need to be high quality.

 

The connectors on my cameras are female, wich i supose it doesn't make sense because the cams are sending the signal to the receiver which is the dvdr so they should be male., but anyway, they are female and the connectors on the dvr are also female.

 

Can you advise me on what to do regarding the connectors and the cable ?

 

Regards

 

Luis Medinas

001_1211.thumb.jpg.29ef94261cf0423ab559502cb6941c88.jpg

001_1225.thumb.jpg.099bea8be93743b97d8deb66c0fc0adf.jpg

Share this post


Link to post
Share on other sites

i would say use RG59 with power. but you need to make the leads. it might be better letting people know were you are. and see if anyone can make and send them to you. plus you also need a power supply for the cameras.

Share this post


Link to post
Share on other sites

Thanks for the reply, i was looking at this precise type of cable, the RG59.

 

So this is it for the cable, i'll buy the RG59 right ?

 

What about the connectors, each end of the cable should have a male plug to interface with the females on both the camera and DVR, right ?

 

Making them will not be a problem, thanks.

 

About the power, yeah. i am looking at an 8 way switch box, 800ma for each output, as this is what the cameras require.

 

Correct ?

 

Thanks alot for the attention

Share this post


Link to post
Share on other sites
Thanks for the reply, i was looking at this precise type of cable, the RG59.

 

So this is it for the cable, i'll buy the RG59 right ?

 

What about the connectors, each end of the cable should have a male plug to interface with the females on both the camera and DVR, right ?

 

Making them will not be a problem, thanks.

 

About the power, yeah. i am looking at an 8 way switch box, 800ma for each output, as this is what the cameras require.

 

Correct ?

 

Thanks alot for the attention

 

Hi yes that correct. the RG59 you can get with power as well i would look at that for your install. all you need at each end is a bnc connector 82-143.jpg

Share this post


Link to post
Share on other sites

Sorry, are you saying that i can send power to the cameras through the RG59 as well as receiving the signal in the DVR ?

Share this post


Link to post
Share on other sites
Sorry, are you saying that i can send power to the cameras through the RG59 as well as receiving the signal in the DVR ?

 

you can get RG59 with power attached siamese. it makes the install easyer.

124091_1.jpg

Share this post


Link to post
Share on other sites

Ok, that should make installation easier you are right.

 

So, i'll just look for RG59 siamese cable and female bnc connectors and i am good to go right ?

 

I also need male plugs for the power cable end to fit in the camera, what are they called please ?

Share this post


Link to post
Share on other sites
Ok, that should make installation easier you are right.

 

So, i'll just look for RG59 siamese cable and female bnc connectors and i am good to go right ?

 

I also need male plugs for the power cable end to fit in the camera, what are they called please ?

 

 

power pig tails power.jpg

Share this post


Link to post
Share on other sites

Thank you my friend.

 

Now, i only need to find a suitable switch box,

I am plan to buy an 8 way one as i currently 6 internal domes and will purchase 2 external different cameras for front and back of the property.

 

The internal domes are 12v DC 800mA.

I'll try to purchase the other 2 cams with similar specs so that i can buy a switch box that is suitable for all of them.

 

is ok if the switch box has more than 800mA isn't it ?

 

It doesn't have to be exactly 800, it could be around 900 or 1000, but not less than the cameras, am i right here ?

Share this post


Link to post
Share on other sites
Thank you my friend.

 

Now, i only need to find a suitable switch box,

I am plan to buy an 8 way one as i currently 6 internal domes and will purchase 2 external different cameras for front and back of the property.

 

The internal domes are 12v DC 800mA.

I'll try to purchase the other 2 cams with similar specs so that i can buy a switch box that is suitable for all of them.

 

is ok if the switch box has more than 800mA isn't it ?

 

It doesn't have to be exactly 800, it could be around 900 or 1000, but not less than the cameras, am i right here ?

 

yes something like this. 1amp on each output. were are you based ??? 124100_1.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×