tkahmed 0 Posted April 5, 2010 American dynamics CCTV Moveing Issus Hi friends I have one Issus for the American dynamics CCTV System I install the below Items all cameras working will, butt I try to moveing DOME OPTIMA COLOUR from keypad and I try many time to understand the Manuel butt I cannot fine a solutions for how to wire TX+ TX- R+ R- Plz anyone have a know for the how I connected the wiring the TOUCH TRACKER way MATRIX or DVR to moved 10 cameras Thank you and best regards 1-PASOPNS or RASOPNS-1 DOME OPTIMA COLOUR 22X,470TVL,OUTDOOR PENDENT MOUNTABLE, SMOKE BUBBLE QTY>10 2- ADCSHR2412N FIXED COLOR CAMERA INDOOR C/W: 540TVL, 0.5 LUX, AUTO IRIS LENS,INDOOR MOUNT QTY>6 3-RJ1SNUD DOME J-BOX OUTDOOR ,1POSITION,SENSORNET,120VAC QTY>10 4-ADC124 POWER SUPPLY ,1OUTPUT120VACTO 24V QTY> 6 5-ADEDVR016064 DIGITAL VIDOEO RECORFER ,16 CH,2OUTPUT,640GB,NTSC,PAL QTY>2 6-ADMPLT32 MATRIX,MEGAPOWER LT32X8 1 QTY>1 7-ADTTE TOUCH TRACKER FOR MATRIX QTY>1 8-ADMNM19LCD 19''LCD COLOR MONITOR QTY>1 9-ADMNM17LCD 17''LCD COLOR MONITOR QTY>2 Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted April 6, 2010 To connect your touchtracker to MPLT32, follow the diagram here: http://americandynamics.net/WebApps/getDocument.aspx?filename=Manual_MPLT_InstallAddendum.pdf This diagram shows how to connect your keyboard to your matrix... as well as other keyboards, etc... we use the same diagram if needed... You can not run data through your DVR - it does not support S-NET... Let us know the outcome... Share this post Link to post Share on other sites
tkahmed 0 Posted April 6, 2010 thank you for your repaly i used the same Daigram to connect from keyboard to matrix, butt how to from matrix to the cameras ? and what exactely pin is given TX+ TX- from matrix ? to R+ R- in the cameras ? and are there are some program for in the keybord or matrix to work moveing ? Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted April 6, 2010 It is a two step process S-Net cable must run between matrix switch to your single position j-box and then from J-box to your optima dome. The first run insure data and video transfer to and from j-box and the second run provides power to dome and data and video return back to j-box.. You probably already have the cable connection diagram for your matrix, for your j-box and for your dome... it should be noted in all manuals step by step... If for whatever reasons none of the manuals are avail, my suggestion is to visit American Dynamics website and download the respective manual... these manuals are the same is what should have been included with each item. Here is the link where you can find all the manuals... http://americandynamics.net/support/documents_index.aspx They have all the manuals for all the systems they manufacture. Share this post Link to post Share on other sites
tkahmed 0 Posted April 6, 2010 plz i serch in the American Dynamics web site butt idont know wich one i want there are caler index plz can you give excate link ? and i am tray same the manual wich come with Matrix and i dont know what you are say It is a two step process S-Net cable must run between matrix switch to your single position j-box and then from J-box to your optima dome. The first run insure data and video transfer to and from j-box and the second run provides power to dome and data and video return back to j-box.. You probably already have the cable connection diagram for your matrix, for your j-box and for your dome... it should be noted in all manuals step by step... plz can you send me the daigram witch you are talking in your replay ? Share this post Link to post Share on other sites
Debsdec 0 Posted May 20, 2010 I have aquired a set of 3 speeddome cameras made by americain dynamics. I am unfirmilare with these cameras and the equipment that came with it. I have a controler which is , a EMI box which has a silver network cable coming out and going into the back of the controller. We have a J BOX, Power supply box. The thing I dont understand is on the manual it says about a sensornet connections? any idea what these are and how they work? Share this post Link to post Share on other sites