help with remote viewing

[2001kx 0]

i have a q-see qsdr008rtc dvr and im trying to view remotely.

i can view it on my LAN but not via the internet away from my LAN.

i forwarded the ports 80 and 9000 as requested to the ip of my dvr.

i then tried using the ip of my router but nothing happens.

 

what i would like to know as well is... i didnt set up a static ip but and i know my ip will change but i figured i could just grab the current ip and use it until it changes then i could just use the new ip once it changes.wil it work that way or do i have to have a static ip?

 

just looking for some direction here as i have tried so many different ways with no luck..

help!!!! lol

thanks in advance.

[scorpion 0]

Reading from your post is appears to me that you are remote viewing using your router's IP address of 192.168.0.1

i then tried using the ip of my router but nothing happens.

 

I was not sure if I read that right or not.

 

I would use IP chicken to give me my WAN address. Try this number remotely and see if it works.

 

http://ipchicken.com/

 

Once you have everything fixed, and working remotely then use this.

 

http://www.dyndns.com/