How to Remote Viewing of cams using QX2006

[gasolina 0]

Hi,

I am toally a newbie in survelliance cams. Anyhow my simple setup is as under :

a. One dedicated P4 based computer, having a generic DVR-8 channels card. The supplier has informed me that this card enables me to remotely view the cams from any other location as well.

b. My PC is linked directly to a ADSL modem. No other computer / item is attached.

c. Four simple security cams are linked to the PCI card in the PC.

d. With my DV Card came QX2006 software. I have installed it, and I am able to view all four cams on my PC monitor.

e. I am now trying to broadcast this stream, so I can view the cams remotely from another place as well.

f. I checked my IP through website ( whatismyip.com ), and it told me it is 119.182.42.65 .

g. In the Settings window of QX2006, I have input the above IP( 119.182.42.65 ) in a box named Web IP.

h. Now whenver, I write the above IP address followed by port number in my browser, nothing gets displayed ( http://119.182.42.65:5050 ) .

i. If I just write the IP in the browser ( http://119.182.42.65 ), then the Setup window of my ADSL modem is opened.

 

Please advise, me how to start configuring my setup, OR if there is some document available any place else, please let me know its URL .

 

The setup guide of QX2006 is totally silent.

 

Thanks

 

GASOLINA

[edselrt 0]

Hi,

I am toally a newbie in survelliance cams. Anyhow my simple setup is as under :

a. One dedicated P4 based computer, having a generic DVR-8 channels card. The supplier has informed me that this card enables me to remotely view the cams from any other location as well.

b. My PC is linked directly to a ADSL modem. No other computer / item is attached.

c. Four simple security cams are linked to the PCI card in the PC.

d. With my DV Card came QX2006 software. I have installed it, and I am able to view all four cams on my PC monitor.

e. I am now trying to broadcast this stream, so I can view the cams remotely from another place as well.

f. I checked my IP through website ( whatismyip.com ), and it told me it is 119.182.42.65 .

g. In the Settings window of QX2006, I have input the above IP( 119.182.42.65 ) in a box named Web IP.

h. Now whenver, I write the above IP address followed by port number in my browser, nothing gets displayed ( http://119.182.42.65:5050 ) .

i. If I just write the IP in the browser ( http://119.182.42.65 ), then the Setup window of my ADSL modem is opened.

 

Please advise, me how to start configuring my setup, OR if there is some document available any place else, please let me know its URL .

 

The setup guide of QX2006 is totally silent.

 

Thanks

 

GASOLINA

 

First off you should contact your supplier for help on the set up of your DVR.

Now you indicated 5050 as your web server port, Can you verify if it is correct?

Are you using Internet explorer? Is your internet explorer set to allow active X downloading and install?

 

edsel

[hassanmurad 0]

I am in exact same position. Searched all over no success. can somebody please guide us.

[ganesh.rao 0]

Check your router or modem's configuration.

 

You will need to do port forwarding or set DMZ host.

[gasolina 0]

Thanks

I have done the Port Forwarding of 68002 and 8080 ports in my modem+router.

But still its not working.

Please note that i am not using static IP, rather its dynamic IP.

I have made a free account in dyndns , but whenever I use this it takes me to the Setup page of my modem, and does not takes me to the DVR.

 

Check your router or modem's configuration.

 

You will need to do port forwarding or set DMZ host.

[miansalmantahir 0]

i am curently facing the same problem.... can someone help?