WDRJack 0 Posted April 27, 2010 Does anyone see any issues running a Panasonic WV-NP502 Ip and analog simultaneously? I've heard certain Panasonic cameras doesn't allow/lose certain function on the test/analog output. I have a 6 camera system and want to just replace the front door camera for better facial recognition (feeding analog to Geovsion and IP to Milestone at the same time). Jack Share this post Link to post Share on other sites
Soundy 1 Posted April 27, 2010 I can't speak for the Panasonic specifically, but I'm doing something like this with an IQEye IQA11 dome, recording the IP data on a Vigil DVR and feeding the analog out to a customer awareness monitor. I know with the CW484 dome, the SDIII function is disabled when you're plugged into the service port, which to my mind is absolutely ridiculous (had a hulluva time setting up the SDIII for cameras that were mounted in a bulkhead!) Share this post Link to post Share on other sites
tison 0 Posted April 27, 2010 I use this camera. I think it's no problem ! Share this post Link to post Share on other sites
WDRJack 0 Posted April 28, 2010 Ok, thanks guys! Both outputs looked good while testing it in the office. I'm just a little worried about the analog output part (Panasonic calls it "Monitor for Adjustment Output Connector") and will leave it on all night to make sure. Jack Share this post Link to post Share on other sites
