Robert Oaks 0 Posted May 2, 2005 Using a new PC, and a GEO 600, 16 camera card, I have experienced a problem that has me puzzled. This setup has 12 cameras. 11 cameras work just fine. Camera 12 has a great picture when viewed on a cctv B&W monitor, using same coax and placed at the same place as the PC. However, when I plug the camera into the GEO card, it brings down most of the other 11 cameras. I remove camera 12, and all is OK. Same thing if plugged into any other input. Can anyone offer any input on this? Thank you very much. Robert Share this post Link to post Share on other sites
