tmescan 0 Posted June 2, 2010 Have 3 locations with a mixture of indoor and outdoor cams. These locations worked fine for maybe a week or 2 then I noticed problems with the outside cameras creating interference with the DVR display. (static throughout all the channels/distortion/pixelation and sometimes the cameras would just go out completely or just freeze that specific camera) When I disconnect these cameras and just leave the indoor cameras, the units work fine. Could there be some sort of compatibility issue? All locations either have a 9 port/10amp or 18 port/12 amp power supply. The sens up cameras are rated at 200ma and the indoor cams are rated at 90ma ir off/210ir on. I have no problems when i use PC based dvrs, only with these 2 particular 16 channel stand alones...hellpppp pleaseeee Share this post Link to post Share on other sites
