Everfocus EQ600 Question

[xxMOISESxx 0]

Hello guys,

 

This is probably a n00b question, I've got an Everfocus EQ600 camera which has the Mirror view setting activated. I read the manual and found out it has a On-Screen display menu I can have access to pressing the buttons on the back of the camera. I press the button, no menu shows up (using BNC output), should I be using S-Video output?

 

Or is there a way to do a hard reset on those settings? (like the reset button of a wireless router)

 

Thanks in advance

[bpzle 0]

Not sure about the neverfocus cameras... but some OSDs only show up on the service video output, not the primary that would go to the DVR. That's pretty rare, but it's a possibility.

[xxMOISESxx 0]

Thanks man, I'm gonna have to try that. Plug the S-Video output of the camera to a TV and see if the OSD menu comes up.

[tomcctv 190]

Thanks man, I'm gonna have to try that. Plug the S-Video output of the camera to a TV and see if the OSD menu comes up.

 

Hi on the everfocus you need to hold the menu button for 5 secs for the menu to come up.

[xxMOISESxx 0]

Hi guys,

 

Holding the button for a few seconds worked. Thank you so much.