More Geo multi screen help!

[antdickens 0]

I am installing a Geo system in a house with 2 cameras attached. I would like to allow the owner to view the cameras on his TV screens using a modulator.

 

Here are my options i think

 

1. use the output from the video out of the vga card on the computer and link to a rf modulator to display the view from the geo system on the tv in the house.

 

2. can you get an rf modulator with two inputs? If possible bypass the geo system and use a t connector to allow the video signal to go to the modulator and then the tvs

 

3. use 2 modulators!! Casn this be done

 

4. use a cheap colur quad and a rf modulator.

 

Any thoughts

[scottj 0]

Use a cheap quad (sequencer) on one of each of the TV's video inputs.

[baywatch 1]

Either

1 - use 2 x modulators & set each to a suitable channel (he can then select which camera he wants to view).

2 - use a domestic 4 camera system such as System Q which has a built in modulator, power supply & the cameras cn be selected by a keyfob from anywhere in the house.

3 - Use a wireless PC Sender to send a picture of your Geovision screen to a single TV.

4 - use the vga card output option with a single modulator.

5 - the quad modulator option will also work.

 

2 x modulators will work.

[antdickens 0]

Thanks Baywatch,

 

Used your last recommendation from Saleem worked spot on.

 

Thanks for your help