x-man 0 Posted July 9, 2010 I have 5 cameras, some 1/4 sharp, some 1/3 sony, some cmos, all of them direct on TV have 100% clear video (full screen) but when I use it on my 8ch techwell chinese card, software idvr4000 and if I watch it at full screen (one camera) on all cameras I have very bad result, small video (4 cameras on screen) is solid but in full screen I can`t see nothing, I can see every pixel!!! Do you have similar problem? Possible to get some better result or this is only camera resolution problem? DVR card problem or camera problem? Resolution of my monitor is 1280x1024... Thanks. Share this post Link to post Share on other sites
Harrar 0 Posted July 12, 2010 Check the resolution or video source settings in your software. Chances are it's set to 160X120. Increase to 320X240 or better yet 640X480. Share this post Link to post Share on other sites
Harrar 0 Posted July 12, 2010 Check the resolution or video source settings in your software. Chances are it's set to 160X120. Increase to 320X240 or better yet 640X480. Share this post Link to post Share on other sites
x-man 0 Posted July 14, 2010 No, that is not problem, all I have set at D1/HD1... Share this post Link to post Share on other sites
