streethacker 0 Posted July 13, 2010 Is there a way to PHYSICALLY tell what CCD is in the camera by takeing it apart..I dont want to rely on what is on the spec sheet due to all the LIES in this field I Know the Chipset is correct Next Chip 2010 ..But i dont see a way to tell what CCD is in it Ive tried looking for a model number with no luck.. THANKS! Share this post Link to post Share on other sites
Dongwonsecurity 0 Posted July 14, 2010 there is a marking(ICX...) on back side of CCD. you should take it apart. -..-! normally 1/3" Sony Super HAD CCD is used for Next2010. Share this post Link to post Share on other sites
streethacker 0 Posted July 14, 2010 I took the CCD board out of the camera..Would it be on the back of the ccd Board or would I have to desolder the CCD from the board? Thanks for your help! Share this post Link to post Share on other sites
Dongwonsecurity 0 Posted July 15, 2010 the marking is on the back of ccd (chipset) so you desolder it to see back side of it. I think no wonder the CCD is 1/3" Sony Super HAD CCD(ICX408/409). Share this post Link to post Share on other sites
SpyGuy10 0 Posted July 20, 2010 No need to desolder the CCD. Just take a pocketknife and carefully pry the CCD off the board so you can inspect the back of the chip for the model number. Reattachment is simple too: just use a drop of superglue (but don't use too much!). Yes, that's a joke. Do NOT do that! Seriously, if you can't trust the specs then why buy the camera? These days, cameras from REPUTABLE manufacturers are inexpensive enough that I can't understand why anyone would buy a questionable piece of junk. Share this post Link to post Share on other sites
appyman 0 Posted July 20, 2010 No need to desolder the CCD. Just take a pocketknife and carefully pry the CCD off the board so you can inspect the back of the chip for the model number. Reattachment is simple too: just use a drop of superglue (but don't use too much!). Yes, that's a joke. Do NOT do that! Seriously, if you can't trust the specs then why buy the camera? These days, cameras from REPUTABLE manufacturers are inexpensive enough that I can't understand why anyone would buy a questionable piece of junk. " title="Applause" /> thank god I did not tried this and read your full reply!!!! Share this post Link to post Share on other sites
Securame 0 Posted July 21, 2010 ^^ Incoming spamer alert....! Share this post Link to post Share on other sites
rory 0 Posted July 22, 2010 ^^ Incoming spamer alert....! thanks, took him out Share this post Link to post Share on other sites
