rj45 to coax ?

[johnwuk 0]

Hi all

would it be poss to convert rj45 to coax, the reason for it is i have a pan and tilt head (videmech 230v model 650-303) and want to use it on a videoswitch key board, but the riecever i have (videoswitch VR-3PM ) is bnc input and the key board (VI-K2 ) rj45 out

or would it be poss to control the p&t from the key board without a reciever ? i only want L & R

up & down, and zoom,

 

any thoughts please,

 

johnw

[Soundy 1]

I can find only very limited info on all those devices (and none at all on the PTZ head). I would guess that the keyboard is using RS-485 output (probably only on the center two pins of the RJ45), and the received is probably a coaxitron received, designed to be used with a coaxitron-capable controller. Chances are that the head itself will support direct RS-485 input so the receiver itself should not be needed.

 

The head should give you pan/tilt control, but the zoom feature would be a function of the camera and lens mounted to it.