Problem with Axis 207. Poor image quality

[mjnavapo 0]

Hello, I have a problem with an Axis 207 IP camera.

 

The image is sometimes very bad, with a kind of interference colors.

 

The failure occurs randomly.

 

Attached is a picture taken with the same camera, one is when it looks good and the other when failure occurs.

 

Does anyone know of that can be? Is there a solution? I tried to reset, to update firmware, etc. ..

 

Thank you.

[thewireguys 3]

Looks like image burn from the sun.

[mjnavapo 0]

Looks like image burn from the sun.

 

Hi, this cloud, under a roof, there is very little sun.

 

I've also tested indoors under artificial light is the same.

 

Even at night, this camera is put into B & W and still have interference, only gray.

 

PS: sorry if I understood, I do not speak English, use google translator.

 

edit: I upload a picture of night

[buellwinkle 0]

Is this a wifi camera? If so it could be signal loss. Have you opened a help desk ticket with Axis?

[mjnavapo 0]

Is this a wifi camera? If so it could be signal loss. Have you opened a help desk ticket with Axis?

 

Hello, it's not wifi, ethernet cable is

 

Axis says the sensor seems to be burned.

 

But it seems strange, the camera has been used very little.

Sometimes it works well and others badly.

[thewireguys 3]

The camera was aimed directly at the sun or there was a strong reflection from the sun. That is image burn, nothing to do with wifi. I 207 is not a outdoor camera and this is what happens when you use it outside.