kovacslajcsi 0 Posted August 10, 2010 Hi, I installed an AVT773W recorder.. I know, it's not the best choice, but it was free of charge My problems are, that i can't find the java plugin for windows, to use the web interface.. The old avtech ftp (ftp://211.22.74.18) is not working anymore (there is a button on the main web page of the recorder, but the "download app" button is not working.. I tried to find a java app. with google, but i failed.. Where can I find it? I tried to contact AVtech, but i didn't get an answer.. the another porblem is, that te communication with VideoServer S application is wery slow. When I press a function button, it takes sometimes 5-10sec's to get the effect, or i need to press it twice.. The beeper in the recorder is beepeng, but there is no effect Is it possible to find a firmware upgrade for an AVT773W recorder? I have 1.0.5.7 installed..I use Video Server S version 1.1.5.5 Share this post Link to post Share on other sites
scorpion 0 Posted August 10, 2010 I would suggest that you do not upgrade the firmware. The IP server is not built in to the DVR. It is a bolt on add on. The server gets the info and passes it to the DVR board, and the responce then gets received and processed, and then the changes happens on screen and is delivered back to the server. Yes it has sever lag. This was the best that they could do at the time in 2006 when it was sold. The product is bullet proof, and will work for years if you have a battery backup (UPS) with line filtration. Change the hard drive as this will cause damage when it crashes. The internal power supply cannot be swapped out. Protect the interpower supply at all costs! I do not know what java ap you speak of. Are you talking about the active x? go to tools > internet options > security tab and change the unsigned active x to prompt. Any questions? http://scorpiontheater.com/cpcamtechsupport.aspx Scroll down till you see the picture of your DVR. Share this post Link to post Share on other sites
kovacslajcsi 0 Posted August 10, 2010 hi, Yes, sorry, i mean Active-X not java.. I made the settings in IE, but still no picture, just the controll buttons are visible.. (see attached picture) All active-x settings are made as described in the manual.. Is it normal, that on the web page of the recorder cameras 1-16 are listed? it is a 4Ch recorder.. Why 16 cameras? is it a software bug? or is that normal? thank You! Share this post Link to post Share on other sites
scorpion 0 Posted August 10, 2010 It sounds like an unsigned active x issue. You may have to delete temp file in the general tab, and close all browsers then open a new one, and then try to load the active x. The software is an all in one for all models of AVTech DVRs. 4 channel, 8 channel, and 16 channel When you connect you will only see a quad screen or the camera that you select. Share this post Link to post Share on other sites
