dadaphil 0 Posted August 19, 2010 wired security camera: Securetek BT-176WC-DN. On the specs sheet it says 'power required 24volts', 'current consumption 12 volts. Do I connect 12 volts or 24 volts? Share this post Link to post Share on other sites
tomcctv 190 Posted August 19, 2010 wired security camera: Securetek BT-176WC-DN. On the specs sheet it says 'power required 24volts', 'current consumption 12 volts. Do I connect 12 volts or 24 volts? Color •BT-176W-DN Wired Day/Night Black and White Bullet Color •BT-176WC-DN Wired Day/Night Color Bullet Specs Image Sensor=1/4" CCD Resolution=380 Lines Min. Illumination=1 Lux F2.0,0 Lux IR ON Lens=4.3mm F1.8 Board Pixels=270,000 Sync. Type=Internal Shutter Speed (NTSC)=1/60 ~ 1/100,000sec S to N Ratio=46dB Rev. Polarity Prot.=Yes Power Required=12 Volt Current Consumption=450mA Max Share this post Link to post Share on other sites
Birdman Adam 0 Posted August 19, 2010 What I do when I seriously can't figure out the voltage required by something is to first power it with the lower voltage, and if it doesn't work, then use the higher one. Share this post Link to post Share on other sites
