ger42 0 Posted August 25, 2010 Problems were me not understanding terminology. It is up and running I purchased a used Axis 241Q . I followed the reset routine in the manual. I then ran the Axis IP utility to change the IP address from the default 192.168.0.090. When done I select the home page button up comes a box with user “root” asking or for a password and a confirmation. When I enter it I get a box asking for a user and password I key root and the password I had set, enter it and get the same box back. I cannot get beyond this. The IP utility finds the address I assigned 192.168.0.120 This PC does not have internet access when I have IP devices I'm trying to attach. I am using Luxriot software and it sees my IP cameras no problem. My connection to the internet is through an Apple Time Capsule and I have not figured out what all my settings need to be to allow the PC to have it's 192.168.X.X address and get to the internet. Any suggestions? Got it so I can configure but now Luxriot cannot connect. Can someone point me to an "expert" in this business? Share this post Link to post Share on other sites
