Will M 0 Posted September 21, 2010 Hi, I have two Dedicated Mocros DS2s (DX09c) that appear to have developed the same fault. The front panel buttons are totally unresponsive. They do nothing. It is possible to control these units with a keyboard (KBS3) plugged into the 485 bus. I was wondering if there is some type of way the front panel has become locked, or is it just a fault on both units? Any help appreciated. Cheers Share this post Link to post Share on other sites
tomcctv 190 Posted September 21, 2010 Hi, I have two Dedicated Mocros DS2s (DX09c) that appear to have developed the same fault. The front panel buttons are totally unresponsive. They do nothing. It is possible to control these units with a keyboard (KBS3) plugged into the 485 bus. I was wondering if there is some type of way the front panel has become locked, or is it just a fault on both units? Any help appreciated. Cheers hi you dont have a problem with your dms. they are just password protected....... hold menu button down for 6 seconds then enter password. Share this post Link to post Share on other sites
Will M 0 Posted September 21, 2010 Hi thanks for the reply. When I hold the menu button down for 6 seconds should this pop up anything on the screen? It does not do anything. Something that may be connected. If I connect using a null modem and use hyperterminal, it won't let me log in using the password found on this forum. Share this post Link to post Share on other sites
tomcctv 190 Posted September 21, 2010 Hi thanks for the reply. When I hold the menu button down for 6 seconds should this pop up anything on the screen? It does not do anything. Something that may be connected. If I connect using a null modem and use hyperterminal, it won't let me log in using the password found on this forum. it will have its own password........... do you not have it............. if not then its a phone call to DM to see what there cost is Share this post Link to post Share on other sites
Will M 0 Posted September 21, 2010 Again thanks for the reply. A couple of days ago the front panel buttons were working. Is it possible that we have activated a password by accident?. If there were a password present would it not still do something, like ask for it on holding the menu key. Lastly I have just got in using hyperterminal when the unit was halted on bootloader. cheers for the help. Share this post Link to post Share on other sites
