MONKEY10 0 Posted September 25, 2010 I think I posted this in the wrong section before so here goes again! I have recently bought a KGuard KG-SHA104 system and have a problem. I was playing with the settings and adjusted the VGA resolution to a setting which my monitor cant cope with. All I now get is a screen which says "OUT OF RANGE". Please can you tell me of a way in which I can reset the DVR to its former settings. Thanks in anticipation Share this post Link to post Share on other sites
SEANHAWG 1 Posted September 26, 2010 Get an RCA cable with BNC adapter and hook it up to a TV. Now that you will be able to see something, go ahead and reset the DVR to your previous VGA settings or reset the whole machine factory Default . Share this post Link to post Share on other sites
jetfxr27 0 Posted October 19, 2010 I too have the same system and did the same thing. I had a 15" LCD monitor and selected a resolution out of range. For me I hooked it up to my 1080P TV via VGA. From there I got in a selected the native resolution of the other monitor which was 1024/768. Hope this helps. Share this post Link to post Share on other sites
